Elektrický ohřev bazénu - topení 12 kW Titan (slaná voda) EOVnTi 3x230V
The electric heating is made of Titanium, making it highly resistant to chemicals and salt.
| Suitable for |
|---|
| Saltwater pools |
| Indoor and outdoor pools |
| Hot tubs and ponds |
| Specifications | Value |
|---|---|
| Power | 12 kW |
| Length incl. fittings | 63 cm |
| Height incl. fittings | 24 cm |
| Package Includes |
|---|
| Plastic heater housing with coil |
| Flow switch |
| Thermostat and thermal fuse |
| 2 pcs of 50mm fittings |
| 2 pcs of wall mounts |
| Wiring |
|---|
| Do not connect the heating coil directly via the flow switch; it must always go through a contactor in the control panel. |
| Install the heater as low as possible, ideally below the water level, to ensure both the switch and the coil remain submerged. |
| Do not connect the heater directly to barbs and hoses. Always use a section of pipe first, then connect a hose with a minimum diameter of 38 mm. |
| Follow the installation manual precisely; the water flow direction must be correct. |
Pool Specialist Opinion - Review
- + Suitable for saltwater pools thanks to the titanium heating element
- + Highly resistant to corrosion and chemical exposure
- + Easy to install in a water circuit with 50 mm pipes
- + Overheating protection thanks to thermostat and thermal fuses
„The EOVnTi series electric heaters are an ideal solution for efficient pool water heating. Thanks to the titanium heating element, they are suitable for saltwater and long-term use. This model ensures high efficiency and operational safety, which every pool owner will appreciate.“
Poolservis team
Efficient Electric Pool Water Heating
The **EOVnTi 12 kW Titan** electric flow heater is designed for heating water in pools and hot tubs. Water flows through the heating element, where it is heated, and the temperature can be regulated using a thermostat. The device uses a titanium heating element, ensuring maximum resistance to corrosion and chemicals.
Operating Conditions
| Parameter | Value |
|---|---|
| Minimum water flow |
4 m³/h (if the route from the pump is longer, a stronger one is required) |
| Operating pressure | 0-3 bar |
| Connection | 50 mm pipe |
| Max chloride content | 150 mg/l |
| Max chlorine content | 1 mg/l |
| pH range | 7.0–7.8 |
Essential Accessories for Proper Functioning
This electric heater does not include power components such as **circuit breakers, residual current devices, contactors**. If you already own a **pool control panel**, these components can be integrated into it. If you do not have a control panel, we recommend purchasing a **control system for filtration and pool heating**, which ensures safe and comfortable operation.
Additional parameters
| Category: | Electric pool heater |
|---|---|
| Weight: | 3 kg |
| Značka: | Vagnerpool |
Be the first who will post an article to this item!
Be the first who will post an article to this item!
