PVC plumbing & installation materials
-
PVC pipes & fittings – 20 mm
-
PVC pipes & fittings – 25 mm
-
PVC pipes & fittings – 32 mm
-
PVC pipes & fittings – 40 mm
-
PVC pipes & fittings – 50 mm
-
PVC pipes & fittings – 63 mm
-
PVC pipes & fittings – 75 mm
-
PVC pipes & fittings – 90 mm
-
Pool valves and check valves
-
PVC pipes
-
Flexible hoses
-
Adhesives and cleaners for pipes and hoses
-
Fittings, adapters, nipples
-
Elbows, T-pieces, couplings
-
PVC reducers
-
PVC plugs
Product sorting
List of products
PVC materials for connecting pool equipment
The circuit between the pool, filtration and other equipment consists of pipes or hoses, fittings, shut-off valves and removable joints. A well-arranged system also leaves space to remove the pump and maintain equipment.
Flexible pipework and solvent-weld joints
The Vágnerpool 50/43 mm flexible PVC hose has an outside diameter of 50 mm and inside diameter of 43 mm. The outside dimension determines which fittings it can be solvent-welded into. This is not the same as a hose with a 50 mm inside diameter fitted over a hose tail.
Isolating and dismantling the circuit
The FIP Easyfit 50 mm ball valve has solvent-weld connections and unions on both sides. It allows a branch to be closed and disconnected at the valve without cutting the solvent-weld pipework.
When designing the circuit, plan transitions between threaded and solvent-weld connections along with access to valve handles. An equipment bypass is designed according to the device's required flow and installation manual.
