T-piece 90° reduced 63 x 50 mm - gluing
Passage piece has diameter 63mm on both sides, side outlet 50mm
Gluing/bonding connection.
Dimensions below
| Description | Dimensions (mm) |
|---|---|
| Inner diameter | 50 or 63 |
| Outer diameter | 75 |
| Total length of T-piece | 144 |
| Depth for inserting the glued piece | 30 |
Pool Specialist Opinion - Review
- + Ideal for connecting pipes of different diameters
- + High durability and long service life
- + Bonding/adhesive connection ensures a solid connection
- + Easy installation using PVC adhesive
- - Requires careful degreasing and preparation before bonding
"T-piece 90° reduced 63 x 50 mm is a key element for efficient and safe connection of water systems. Its robust construction and ease of installation make it a reliable addition to any pool or aquatic infrastructure."
Team Poolservis
Reliable and efficient pipe connection
The T-piece 90° Reduced 63 x 50 mm is designed for the connection of pipes with diameters of 63 mm and 50 mm. Its through section has a diameter of 63 mm on both sides, while the side outlet has a diameter of 50 mm, allowing easy connection of pipes of different sizes.
Assembly and Installation
Special PVC adhesive must be used for installation. It is important to degrease the surfaces properly with a PVC cleaner before gluing to ensure a strong and long-lasting connection. After gluing, it is recommended to allow the joint to set for 24 hours to ensure maximum strength and durability of the joint.
To bond the joint, you need to use adhesive - link here.
Before gluing, degrease the areas with PVC cleaner where the glue will be applied. After bonding, allow to set for 24 hours.
Additional parameters
| Category: | PVC diameter 50mm |
|---|---|
| Weight: | 0.18 kg |
| Značka: | Vagnerpool |
Be the first who will post an article to this item!
Be the first who will post an article to this item!
