Axel 6 pool pump – 6 m³/h, 230 V
Straightforward filtration for a private pool. Axel 6 is a self-priming 230 V pump with a prefilter and a supplier-rated flow of 6 m³/h.
- Suitable for freshwater and saltwater up to 5 g/l.
- 2-inch inlet and 1½-inch outlet, internal threads.
- Supplied with a 3.5 m power cable; P1 input 0.45 kW.
We can help check the connections and filter compatibility before you order.
Pool specialist’s opinion
- + Self-priming design with a prefilter for coarse debris.
- + Suitable for saltwater pools up to 5 g/l.
- + A 3.5 m power cable is included.
- − Single-speed operation without variable-speed control.
- − Inlet and outlet threads have different sizes.
Our recommendation: Axel 6 suits a simple private-pool filtration system. When replacing an older pump, compare the thread sizes, inlet centre height and motor clearance. Send us your filter and pipework details to check the match.
Poolservis team
Everyday pool filtration
The self-priming Axel has a prefilter to intercept coarse debris. Its shaft does not contact the pool water. Vagnerpool specifies installation up to 3 m above or 3 m below the water level; pipework and priming conditions must be considered.
Technical specifications
| Model / supplier code | Axel 6 / 574218 |
| Supplier-rated flow | 6 m³/h |
| P1 input / P2 output | 0.45 / 0.25 kW |
| Power supply | 230 V |
| Inlet / outlet | 2″ / 1½″, internal threads |
| Motor speed / protection | 2,840 rpm / IP55 |
| Maximum water temperature / pressure | 60 °C / 2.5 bar |
| Saltwater compatibility | Yes, up to 5 g/l |
| Self-priming / prefilter | Yes / yes |
| Power cable | 3.5 m |
| Drawing width / height | 196 / 299 mm |
| Inlet centre height | 185 mm |
Dimensions and replacement
The supplier’s drawing shows a width of 196 mm, a height of 299 mm and an inlet centre height of 185 mm. Allow approximately 150 mm above the lid for basket removal and approximately 120 mm behind the motor for service. Overall length is marked “max. L” separately in the drawing; do not treat the 420 mm dimension as the overall motor length. For a replacement in a confined space, ask us to confirm the length of the supplied motor version.
Selection and care
Actual flow depends on the filter, pipework and elevation. Match the pump curve to your system and the filter’s permitted flow. Prime before starting and never run dry. Before cleaning, disconnect power and release pressure. Keep the motor ventilated and protect the installation from flooding and frost.
Official technical documentation
Vagnerpool catalogue – Axel specifications, drawing and performance curves, page 171 (PDF)
Additional parameters
| Category: | Swimming pool pumps |
|---|---|
| Weight: | 9.8 kg |
| ? Doporučený objem bazénu (orientační): | 20–40 m³ |
| Napájení: | 230 V jednofázové |
| Použití čerpadla: | Bazénová filtrace |
| Průtok čerpadla: | 6–10 m³/h |
| Připojení sání: | Vnitřní závit 2″ |
| Připojení výtlaku: | Vnitřní závit 1½″ |
| Regulace otáček: | Bez regulace |
| Samonasávací: | Ano |
| Typ produktu: | Filtrační čerpadlo |
| Vhodné pro slanou vodu: | Ano |
| Supplier-rated flow: | 6 m³/h |
| Power supply: | 230 V |
| P1 input / P2 output: | 0.45 / 0.25 kW |
| Inlet / outlet threads: | 2″ / 1½″, internal |
| Self-priming: | Yes |
| Speed control: | No – single speed |
| Water type: | Freshwater and saltwater, up to 5 g/l |
| Motor protection: | IP55 |
| Max. water temperature / pressure: | 60 °C / 2.5 bar |
| Drawing width / height: | 196 / 299 mm |
| Inlet centre height: | 185 mm |
| Motor speed: | 2,840 rpm |
| Power cable: | 3.5 m |
Discussion
Be the first who will post an article to this item!
Product rating
Be the first who will post an article to this item!