Intex adapter from 2-inch Intex nut to 1½-inch male thread – for skimmers, jets and filtration
PVC adapter – 2-inch male thread for an Intex nut, with a 1½-inch (6/4-inch) male thread on the other side for skimmers, filtration systems and return jets
To seal the connection, you can place on the seating surface an O-ring seal 47 × 5 mm
| Specification | Details |
|---|---|
| Male thread | 2" (59.5 mm) |
| Male thread on the other side | 1 1/2" (48 mm) |
| Overall length | 65 mm |
Pool specialist tip
An Intex designation alone does not ensure a match with every connector. Tighten appropriately and check watertightness before operation.
Poolservis team
A threaded transition from an Intex union to pool equipment
This reducer connects a corresponding Intex union nut to an equipment connection with a 1½-inch thread. The Intex-nut side has a 2-inch male thread, and the opposite side has a 1½-inch male thread, also designated 6/4 inch. It is useful when assembling a suitable connection to a skimmer, return fitting or filtration equipment. Matching both threaded connections is essential when choosing this particular component.
Select against both sides of the connection
First identify the union nut and threaded equipment fitting you need to join. This reducer is neither a hose barb nor a clamp-on adapter for a smooth wall fitting. Compare the product dimensions and length with the available space in the assembly. Similar connection descriptions can conceal different seating or thread designs. The Intex name on a hose alone therefore does not provide all the information required to choose the correct transition.
Use a seal suited to the joint design
Inspect the seating surfaces and use the correct seal for the particular connection. At a union-nut joint, the seal must sit correctly on its intended surface. Keep the nut straight and engage the threads without force. Do not try to overcome a leak by overtightening plastic components. Select the sealing method for the other threaded side according to the actual joint and equipment design, rather than applying the method used on an unrelated fitting.
A practical component for adapting pool pipework
A correctly selected reducer connects a suitable hose arrangement to another part of the equipment without improvising a joint between mismatched parts. Switch the pump off and prevent unintended water loss before installation. Once assembled, check that the pipe or hose is not pulling on the joint and inspect for leaks during startup. Examine the old seal during replacement as well: a worn sealing component can cause problems even when the reducer itself is new.
Adapter for matching pool hoses or threaded connectors. Before ordering, compare both connections, thread pitch and face seals with the original assembly.
Additional parameters
| Category: | PVC reducers |
|---|---|
| Weight: | 0.08 kg |
| Brand: | Vagnerpool |
| Connection type: | Male thread |
| Type of fitting: | Reducer |
| Thread size: | 2 × 1 1/2″ |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!