Magnus 1250 – 400 V, 152 m³/h (at 10 m head), stainless steel impeller, 9,20 kW
Magnus 1250 – 400 V, 152 m³/h (at 10 m head), stainless steel impeller, 9,20 kW. High-capacity Magnus pool pump. The impeller version and electrical specifications for this product code are listed in the table.
Pool technician’s view
Select a pump by its flow at the actual system head. Check the pipework, electrical supply and the maximum permitted filter pressure. A larger rated flow alone does not guarantee a better installation.
Poolservis team
Magnus 1250 – 400 V, 152 m³/h (at 10 m head), stainless steel impeller, 9,20 kW
High-capacity Magnus pool pump. The impeller version and electrical specifications for this product code are listed in the table.
Technical specifications
| Gross weight (kg) | 84,5 |
|---|---|
| Flow rate | 152 m3/h |
| Prefilter | Yes |
| Salt water above 5 g/l | Yes |
| Power input | 10,45 kW |
| Voltage | 400/690 V |
| Motor output | 9,2 kW |
| Self-priming | Yes |
| Motor protection | IP55 |
| Salt water up to 5 g/l | Yes |
| Housing material | Polypropylene |
| Maximum working pressure | 2,5 bar |
| Sea water | Yes |
| Lubricated-for-life motor bearings | Yes |
| Impeller material | AISI316L |
| Current | 18,5 A |
| Product type | High-capacity filtration pump |
| Suction / discharge flange | 110 / 110 mm |
| Series | Magnus |
| Supplier code | 573MAG1250S |
Selection and installation
The flow rate depends on system head. Use the manufacturer’s Q/H curve to check the operating point. Install and wire the pump according to its manual and motor rating plate.
Manufacturer documentation
Dimension drawing
Drawing for the model series; check the row and connection version for the selected model.
Performance curve Q/H
Q is the flow rate and H is the head. Select the model curve and check the required operating point. The curves show different speeds or models where indicated.
Additional parameters
| Category: | Swimming pool pumps |
|---|---|
| Weight: | 84.5 kg |
| ? Doporučený objem bazénu (orientační): | Do 140 m³ |
| Napájení: | 400 V třífázové |
| Použití čerpadla: | Bazénová filtrace |
| Průtok čerpadla: | Nad 30 m³/h |
| Připojení sání: | Příruba 110 mm |
| Připojení výtlaku: | Příruba 110 mm |
| Regulace otáček: | Bez regulace |
| Samonasávací: | Ano |
| Typ produktu: | Filtrační čerpadlo |
| Vhodné pro slanou vodu: | Ano |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!