MiniSalt NPS 16/80 (LS 12/60) salt chlorinator – complete system
16 g/h NS / 12 g/h LS · Pools up to 80 m³ · NPS 16/80
Complete salt chlorinator with controller and electrolytic cell. Adjustable chlorine generation, polarity reversal and straightforward operation. An option for owners considering both normal-salt and low-salt operation. Available output and pool-volume rating change in Low Salt mode.
Part code: 852613
Pool specialist’s view
An option for owners considering both normal-salt and low-salt operation. Available output and pool-volume rating change in Low Salt mode.
+ Straightforward control and adjustable chlorine output
+ Self-cleaning electrode with polarity reversal
+ Normal Salt / Low Salt operation according to the selected setting
− Separate pH and chlorine checks remain necessary
On-site chlorine generation for pools up to 80 m³
MiniSalt NPS 16/80 is a complete salt chlorinator with a controller and electrolytic cell. It generates chlorine from salt dissolved in the pool water while circulation runs. Adjust production to the pool conditions and filtration schedule for ongoing on-site disinfection.
In Normal Salt mode this version has a rated output of 16 g/h. Low Salt operation corresponds to the LS 12 version and 12 g/h output; reducing salt concentration does not retain the same output.
Controls you can understand
The display shows the production setting, which you adjust using the controls. The production setting is not a measurement of the current chlorine level in the water.
Polarity reversal helps keep the electrode clean
Regular polarity reversal limits scale build-up. Set the interval according to water hardness and the manual; periodic inspection of the cell is still necessary.
Production to suit pool use
Adjust the setting for temperature, bathing load and filtration time. A covered pool may need a different daily output from a hot weekend with frequent use.
A cell you can inspect
The transparent housing allows visual inspection of the electrode. Also check contacts, seals and connections during maintenance, rather than only the titanium plates.
Specifications for this version
Selection advice
Consider the 80 m³ rating together with operating conditions. Warmer water, frequent bathing and short filtration runs increase the output required. Near the volume limit, consider the next model rather than relying on a smaller unit running continuously at its maximum.
What makes up the supplied system
- The MiniSalt electronic controller for this version.
- The matching electrolytic cell.
- The corresponding cell and power leads and controller bracket for the supplied version.
Salt, pH regulation, the filtration pump and site-specific pipework materials are separate installation considerations. When replacing an older chlorinator, check space and the new cell connections.
Water and equipment care
Regularly test pH and free chlorine even in a saltwater pool. Check salinity, cell cleanliness and filtration run time. Self-cleaning reduces deposits but does not remove the need to inspect the electrode. Follow the manual for the exact generation when cleaning and winterising.
Frequently asked questions
Is a saltwater pool chlorine-free?
No. The chlorinator makes chlorine from salt within the equipment. The benefit is how chlorine is generated and supplied, not the elimination of chlorine disinfection.
Does this offer also regulate pH?
The MiniSalt offered here is a salt chlorinator. Automatic pH regulation requires a separate suitable device.
Manufacturer video – MiniSalt range
The video covers the MiniSalt range. Always match control and installation details to the manual for your equipment generation.
Additional parameters
| Category: | MiniSalt salt chlorinators |
|---|---|
| Brand: | Minisalt |
| ? Chlorine production: | 15–20 g/h |
| ? For pool volume: | 60–80 m³ |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!