Phosphate HR No. 1 for digital photometers – 10 sachets
Phosphate HR No. 1 by Water-i.d. for high-range phosphate testing with a compatible digital photometer. The sales unit contains 10 sachets. Use with the other reagents specified by the method; this reagent alone is not a complete test. See the product description for PoolLab 2.0 instructions and required equipment. For water analysis only.
Phosphate HR No. 1: reagent for high-range phosphate analysis
Phosphate HR No. 1 by Water-i.d. is a powder reagent for photometric high-range phosphate measurement. Replace the specific reagent without buying a new testing instrument. Reliable results require the correct program, sample preparation and reagent combination.
What is included
10 sachets of Phosphate HR No. 1. The price and order quantity refer to this sales unit, not to the manufacturer’s wholesale box.
Other required reagents / equipment: Phosphate HR No. 2; 25mm GF/C filtr / filter. Other reagents and the photometer are not included.
| Parameter | Value |
|---|---|
| Manufacturer | Water-i.d. |
| Form | Powder in individual sachets |
| Sales unit | 10 sachets |
| PoolLab 2.0 method | PPHR |
| PoolLab 2.0 range | 0–80 mg/l PO₄³⁻ |
| Other reagents / equipment | Phosphate HR No. 2; 25mm GF/C filtr / filter |
Quick measurement instructions – PoolLab 2.0
- Prepare a 25 mm GF/C filter and filter 15 ml of sample as instructed. Discard the first 5 ml of filtrate and use the remaining 10 ml for testing.
- Select Phosphate HR (PPHR). On PoolLab 2.0, test this parameter on its own in the middle chamber T2 and perform ZERO with the prepared sample before adding reagents.
- Dissolve the entire contents of 1 Phosphate HR No. 1 sachet. Then add 1 Phosphate HR No. 2 tablet and dissolve completely.
- Close the cover, start OK/TEST and wait until the countdown finishes. Read the result in the units of the selected method.
Do not skip the instrument countdown. Use clean equipment and rinse the chamber and stirring rod thoroughly after testing. Check exact conditions, pretreatment and possible interferences in the manufacturer’s instructions.
Digital photometer compatibility
The stated procedure and measuring range apply to the corresponding PoolLab 2.0 method. For another photometer, use this reagent only if its manufacturer specifies this exact reagent and procedure. A matching parameter name alone does not establish compatibility. Do not confuse No. 1 with No. 2 or LR (low range) with HR (high range).
Storage and handling
Keep in the original tightly closed packaging as directed by the manufacturer. Prevent contamination, check the expiry date and follow the label and safety data sheet for the supplied batch. For analysis of a water sample only; do not add directly to pool water. Keep out of reach of children.
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!