WYBOT F1 solar robotic pool skimmer
Our pool specialist’s view
Collects floating leaves and insects
Solar charging with wired charging also available
Top-access 180 µm basket and app controls
Does not clean the floor, walls or waterline
Solar operation depends on sunlight reaching the pool
We would recommend F1 as a complement to a floor cleaner, especially near trees or where insects frequently collect. Ongoing skimming catches debris while it is still floating. For solar operation, consider how much sunlight the pool receives during the day.
the Poolservis team
WYBOT F1 solar robotic pool skimmer
WYBOT F1 is a surface skimmer for collecting floating leaves, insects and other debris. It complements a floor cleaner, particularly where debris regularly falls into the pool from its surroundings.
Dimensions and key specifications
| Product code | 60WF1 |
|---|---|
| Cleaning coverage | Water surface only |
| Supplied filtration | 180 µm |
| App control | Yes |
| Filter access | Top access |
| Trolley included | No |
Choosing this cleaner
✓No power cable during cleaning
✓Floating-debris collection
✓Top-access filter
Keep in mind: It cleans the water surface, not the floor, walls or waterline. Solar operation depends on sunlight, so a fixed number of continuous operating hours is not promised.
How this model works in practice
The solar panel supports charging during use, with wired charging available in weaker sunlight. Sensors and a gyroscope help with navigation around obstacles. The 180 µm basket is accessed from above, and the app offers modes and supported manual steering.
Controls and equipment
- A built-in rechargeable battery allows operation without a power cable attached.
- Solar charging depends on sunlight. Charging with an electrical adapter is also available.
- Collects floating debris from the water surface. It does not replace a floor and wall cleaner.
Filtration: what is actually supplied
This version is supplied with 180 µm filtration. A lower micron figure indicates finer filtration. Fine filters clog sooner under a heavy debris load, so check them regularly. The cleaner does not replace the pool’s filtration and water treatment.
Before choosing
It cleans the water surface, not the floor, walls or waterline. Solar operation depends on sunlight, so a fixed number of continuous operating hours is not promised.
Verified supplied equipment
- WYBOT F1 solar robotic pool skimmer
- supplied 180 µm filter
This overview lists the verified core equipment for this version. Other filter grades and optional accessories are not automatically included.
Care after cleaning
Lift the cleaner by its handle and allow water to drain. Empty the filter and rinse it with clean water; a clogged basket reduces suction. Follow the manufacturer’s operating, charging and storage instructions.
Product video: WYBOT F1
Video by: WYBOT Official
How to care for your automatic pool cleaner
Regular care helps maintain performance and extend the cleaner’s service life. Refer to the manual for detailed instructions and the operating limits of your model.
- Maintain correct pH and chemical levels. Unsuitable pH or excessive sanitiser concentrations can damage materials and shorten the cleaner’s life.
- Do not leave the cleaner in the pool unnecessarily. The skimmer operates on the surface during scheduled debris collection. When not in use, remove it, rinse with clean water and store in a dry, ventilated place. Do not use the pool for permanent storage.
- Clean the filter after every use. Empty and thoroughly rinse the basket or filter bag. A clogged filter restricts water flow and reduces cleaning performance.
- Rinse the entire cleaner after use in salt water. Avoid unnecessary immersion. After removal, thoroughly rinse the exterior, filter compartment and removable filters with clean, unsalted water to remove salt residue. Follow the manual’s rinsing and handling instructions.
Additional parameters
| Category: | Cordless robotic pool cleaners |
|---|---|
| ? Cleaning coverage: | Water surface only |
| Robot power supply: | Cordless rechargeable |
| ? Filter fineness: | 150 µm and above |
| ? App control: | Yes |
| Filter access: | Top access |
| ? Transport trolley included: | No |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!