CNX-Li 52 iQ robotic pool cleaner
Our pool specialist’s view
Complete cleaning without a power cable
Top-access 100 µm basket
Supported status functions in iAquaLink
The supplied batch must be checked against the recall before sale
Approximately five-hour charging for up to 120 minutes of runtime
CNX-Li 52 iQ offers convenient cordless whole-pool cleaning. Before recommending this version for purchase, we want the supplied batch verified against the manufacturer’s service campaign. The listing remains hidden until that is confirmed.
the Poolservis team
CNX-Li 52 iQ robotic pool cleaner
CNX-Li 52 iQ combines cordless operation with floor, wall and waterline cleaning for pools up to 10 × 5 m. It suits owners prioritising cable-free handling and app-based status monitoring.
Dimensions and key specifications
| Product code | 606977 |
|---|---|
| Cleaning coverage | Floor, walls and waterline |
| Maximum pool dimensions | 10 × 5 m |
| Supplied filtration | 100 µm |
| Maximum battery runtime | Up to 120 min |
| Charging time | 5 h |
| App control | Yes |
| Filter access | Top access |
| Trolley included | No |
Choosing this cleaner
✓No power cable during cleaning
✓Floor, wall and waterline cleaning
✓Top-access filter
Keep in mind: This model remains hidden pending verification of the supplied batch. Selected serial numbers are covered by the manufacturer’s recall; its equipment should not be confused with newer RF/OF 42iQ models.
How this model works in practice
This version is supplied with a 100 µm basket and charger. The basket is accessed from above. Runtime is up to 120 minutes with approximately five-hour charging, and supported status functions are available in iAquaLink.
Controls and equipment
- A built-in rechargeable battery allows operation without a power cable attached.
- The iAquaLink app provides status monitoring and the functions supported by this model. A charger and 100 µm filter are supplied.
Filtration: what is actually supplied
This version is supplied with 100 µm filtration. A lower micron figure indicates finer filtration. Fine filters clog sooner under a heavy debris load, so check them regularly. The cleaner does not replace the pool’s filtration and water treatment.
Before choosing
This model remains hidden pending verification of the supplied batch. Selected serial numbers are covered by the manufacturer’s recall; its equipment should not be confused with newer RF/OF 42iQ models.
Verified supplied equipment
- CNX-Li 52 iQ robotic pool cleaner
- supplied 100 µm filter
- charger
This overview lists the verified core equipment for this version. Other filter grades and optional accessories are not automatically included.
Care after cleaning
Lift the cleaner by its handle and allow water to drain. Empty the filter and rinse it with clean water; a clogged basket reduces suction. Before charging out of the pool, clean and dry the charging contact as instructed.
Product video: Zodiac Freedom CNX-Li 52 iQ
Video by: Hidraulicart
How to care for your automatic pool cleaner
Regular care helps maintain performance and extend the cleaner’s service life. Refer to the manual for detailed instructions and the operating limits of your model.
- Maintain correct pH and chemical levels. Unsuitable pH or excessive sanitiser concentrations can damage materials and shorten the cleaner’s life.
- Do not leave the cleaner in the pool unnecessarily. Remove the cleaner from the water after the cleaning cycle. Rinse it with clean water, allow it to drain and store it in a dry, ventilated place. Unnecessary prolonged immersion exposes its components to pool chemicals and mineral deposits.
- Clean the filter after every use. Empty and thoroughly rinse the basket or filter bag. A clogged filter restricts water flow and reduces cleaning performance.
- Rinse the entire cleaner after use in salt water. Avoid unnecessary immersion. After removal, thoroughly rinse the exterior, filter compartment and removable filters with clean, unsalted water to remove salt residue. Follow the manual’s rinsing and handling instructions.
Additional parameters
| Category: | Cordless robotic pool cleaners |
|---|---|
| ? Cleaning coverage: | Floor, walls and waterline |
| Robot power supply: | Cordless rechargeable |
| ? Recommended pool length: | 8–10 m |
| ? Filter fineness: | 60–120 µm |
| ? Pool surface: | Liner / PVC, Fibreglass, Concrete, Ceramic tiles and mosaic |
| ? Pool floor profile: | Flat, Sloping, Complex |
| ? App control: | Yes |
| Filter access: | Top access |
| ? Battery runtime: | 90–150 min |
| ? Transport trolley included: | No |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!