Fairland iGarden K120 PRO robotic pool cleaner
Our pool specialist’s view
Complete maintenance of larger pools
Long floor-cleaning runtime
Retrieval remote for easier removal
The twelve-hour maximum applies to floor mode only
The cleaner must be removed for charging
We would recommend K120 PRO mainly for a larger pool that benefits from its long runtime reserve. The retrieval remote is a useful addition. For comparison, full-cleaning runtime matters more than the twelve-hour floor-only maximum alone.
the Poolservis team
Fairland iGarden K120 PRO robotic pool cleaner
K120 PRO suits larger pools up to 8 × 15 m and owners seeking a long runtime reserve without a power cable. It covers the floor, walls and waterline.
Dimensions and key specifications
| Product code | 60K120P |
|---|---|
| Cleaning coverage | Floor, walls and waterline |
| Maximum pool dimensions | 8 × 15 m |
| Supplied filtration | 180 + 50 µm |
| Maximum battery runtime | Up to 720 min |
| Charging time | 6.5 h |
| App control | Yes |
| Filter access | Top access |
| Trolley included | No |
| Runtime: floor / full cleaning | 12 h / 7 h |
Choosing this cleaner
✓No power cable during cleaning
✓Floor, wall and waterline cleaning
✓Top-access filter
Keep in mind: Do not confuse K120 PRO with the camera-equipped K-AI Pro120. This listing follows its own equipment specification and manual.
How this model works in practice
The twelve-hour maximum refers to floor mode; full cleaning reaches approximately seven hours. Filtration combines 180 and 50 µm. An included retrieval remote helps bring the cleaner back for removal, and modes can be set in iGarden Robotics.
Controls and equipment
- A built-in rechargeable battery allows operation without a power cable attached.
- Select modes, cycle length and other settings on the cleaner or in the iGarden Robotics app. Configure the app while the robot is out of the water.
- The stated maximum runtime applies to floor-cleaning mode; walls, waterline and Turbo cleaning reduce runtime.
- This version includes a retrieval remote to help bring the cleaner to the pool edge.
Filtration: what is actually supplied
This version is supplied with 180 + 50 µm filtration. A lower micron figure indicates finer filtration. Fine filters clog sooner under a heavy debris load, so check them regularly. The cleaner does not replace the pool’s filtration and water treatment.
Before choosing
Do not confuse K120 PRO with the camera-equipped K-AI Pro120. This listing follows its own equipment specification and manual.
Verified supplied equipment
- Fairland iGarden K120 PRO robotic pool cleaner
- supplied 180 + 50 µm filter
- retrieval remote
This overview lists the verified core equipment for this version. Other filter grades and optional accessories are not automatically included.
Care after cleaning
Lift the cleaner by its handle and allow water to drain. Empty the filter and rinse it with clean water; a clogged basket reduces suction. Before charging out of the pool, clean and dry the charging contact as instructed.
Introducing the range: Fairland iGarden K
This video introduces the model range and may show a different version. The exact equipment, filtration and features of this offer are listed in the table and description above.
Video by: VÁGNER POOL
How to care for your automatic pool cleaner
Regular care helps maintain performance and extend the cleaner’s service life. Refer to the manual for detailed instructions and the operating limits of your model.
- Maintain correct pH and chemical levels. Unsuitable pH or excessive sanitiser concentrations can damage materials and shorten the cleaner’s life.
- Do not leave the cleaner in the pool unnecessarily. Remove the cleaner from the water after the cleaning cycle. Rinse it with clean water, allow it to drain and store it in a dry, ventilated place. Unnecessary prolonged immersion exposes its components to pool chemicals and mineral deposits.
- Clean the filter after every use. Empty and thoroughly rinse the basket or filter bag. A clogged filter restricts water flow and reduces cleaning performance.
- Rinse the entire cleaner after use in salt water. Avoid unnecessary immersion. After removal, thoroughly rinse the exterior, filter compartment and removable filters with clean, unsalted water to remove salt residue. Follow the manual’s rinsing and handling instructions.
Additional parameters
| Category: | Cordless robotic pool cleaners |
|---|---|
| ? Cleaning coverage: | Floor, walls and waterline |
| Robot power supply: | Cordless rechargeable |
| ? Recommended pool length: | 12–15 m |
| ? Filter fineness: | 20–60 µm, 150 µm and above |
| ? App control: | Yes |
| Filter access: | Top access |
| ? Battery runtime: | Over 240 min |
| ? Transport trolley included: | No |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!