Fairland iGarden K70 robotic pool cleaner
Our pool specialist’s view
Cleans the floor, walls and waterline
Supplied dual 180 + 50 µm filtration
Up to seven hours on the floor, approximately 3.75 hours for full cleaning
The seven-hour maximum does not apply to full cleaning
Approximately five-hour charging; app settings out of the water
K70 makes sense when a longer runtime reserve than K40 is wanted, particularly for routine maintenance of a larger pool. We distinguish the seven-hour floor-mode maximum from the shorter runtime during complete cleaning.
the Poolservis team
Fairland iGarden K70 robotic pool cleaner
K70 suits pools up to 6 × 12 m when a longer runtime reserve than the K40 is wanted. It covers the floor, walls and waterline, with programmes chosen to suit current needs.
Dimensions and key specifications
| Product code | 60K070 |
|---|---|
| Cleaning coverage | Floor, walls and waterline |
| Maximum pool dimensions | 6 × 12 m |
| Supplied filtration | 180 + 50 µm |
| Maximum battery runtime | Up to 420 min |
| Charging time | 5 h |
| App control | Yes |
| Filter access | Top access |
| Trolley included | No |
| Runtime: floor / full cleaning | 7 h / 3.75 h |
Choosing this cleaner
✓No power cable during cleaning
✓Floor, wall and waterline cleaning
✓Top-access filter
Keep in mind: The seven-hour figure applies to floor mode. Configure the app out of the water; this is not a promise of continuous underwater control.
How this model works in practice
Floor-only runtime reaches up to seven hours, while full cleaning is approximately 3.75 hours. Supplied filtration is 180 + 50 µm, with top access for rinsing. The manual specifies approximately five-hour charging.
Controls and equipment
- A built-in rechargeable battery allows operation without a power cable attached.
- Select modes, cycle length and other settings on the cleaner or in the iGarden Robotics app. Configure the app while the robot is out of the water.
- The stated maximum runtime applies to floor-cleaning mode; walls, waterline and Turbo cleaning reduce runtime.
Filtration: what is actually supplied
This version is supplied with 180 + 50 µm filtration. A lower micron figure indicates finer filtration. Fine filters clog sooner under a heavy debris load, so check them regularly. The cleaner does not replace the pool’s filtration and water treatment.
Before choosing
The seven-hour figure applies to floor mode. Configure the app out of the water; this is not a promise of continuous underwater control.
Verified supplied equipment
- Fairland iGarden K70 robotic pool cleaner
- supplied 180 + 50 µm filter
This overview lists the verified core equipment for this version. Other filter grades and optional accessories are not automatically included.
Care after cleaning
Lift the cleaner by its handle and allow water to drain. Empty the filter and rinse it with clean water; a clogged basket reduces suction. Before charging out of the pool, clean and dry the charging contact as instructed.
Introducing the range: Fairland iGarden K
This video introduces the model range and may show a different version. The exact equipment, filtration and features of this offer are listed in the table and description above.
Video by: VÁGNER POOL
How to care for your automatic pool cleaner
Regular care helps maintain performance and extend the cleaner’s service life. Refer to the manual for detailed instructions and the operating limits of your model.
- Maintain correct pH and chemical levels. Unsuitable pH or excessive sanitiser concentrations can damage materials and shorten the cleaner’s life.
- Do not leave the cleaner in the pool unnecessarily. Remove the cleaner from the water after the cleaning cycle. Rinse it with clean water, allow it to drain and store it in a dry, ventilated place. Unnecessary prolonged immersion exposes its components to pool chemicals and mineral deposits.
- Clean the filter after every use. Empty and thoroughly rinse the basket or filter bag. A clogged filter restricts water flow and reduces cleaning performance.
- Rinse the entire cleaner after use in salt water. Avoid unnecessary immersion. After removal, thoroughly rinse the exterior, filter compartment and removable filters with clean, unsalted water to remove salt residue. Follow the manual’s rinsing and handling instructions.
Additional parameters
| Category: | Cordless robotic pool cleaners |
|---|---|
| ? Cleaning coverage: | Floor, walls and waterline |
| Robot power supply: | Cordless rechargeable |
| ? Recommended pool length: | 10–12 m |
| ? Filter fineness: | 20–60 µm, 150 µm and above |
| ? App control: | Yes |
| Filter access: | Top access |
| ? Battery runtime: | Over 240 min |
| ? Transport trolley included: | No |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!