iGarden KN40 robotic pool cleaner
Our pool specialist’s view
Complete cordless cleaning
Settings through a mobile app
Top-access filter basket
Consider the supplied basket’s grade against your debris
Finer filters supplied with other iGarden models cannot be assumed included
We would choose KN40 for complete cordless cleaning and app settings within its recommended pool size. Pay particular attention to the supplied basket’s fineness. Finer filters included with other iGarden models cannot automatically be assumed here.
the Poolservis team
iGarden KN40 robotic pool cleaner
iGarden KN40 is a cordless model for pools up to 6 × 10 m. It suits floor, wall and waterline maintenance with settings available both on the unit and through an app.
Dimensions and key specifications
| Product code | 60KN040 |
|---|---|
| Cleaning coverage | Floor, walls and waterline |
| Maximum pool dimensions | 6 × 10 m |
| Supplied filtration | 180 µm |
| Maximum battery runtime | Up to 240 min |
| Charging time | 4 h |
| App control | Yes |
| Filter access | Top access |
| Trolley included | No |
Choosing this cleaner
✓No power cable during cleaning
✓Floor, wall and waterline cleaning
✓Top-access filter
Keep in mind: The 50 µm filter supplied with some other K models is not automatically included here. Allow for the limitations of the supplied 180 µm basket on very fine debris.
How this model works in practice
The supplied 180 µm basket is accessed from above. Runtime reaches up to four hours depending on mode, with approximately four-hour charging. Configure iGarden Robotics while the robot is out of the water.
Controls and equipment
- A built-in rechargeable battery allows operation without a power cable attached.
- Select modes, cycle length and other settings on the cleaner or in the iGarden Robotics app. Configure the app while the robot is out of the water.
- The stated maximum runtime applies to floor-cleaning mode; walls, waterline and Turbo cleaning reduce runtime.
Filtration: what is actually supplied
This version is supplied with 180 µm filtration. A lower micron figure indicates finer filtration. Fine filters clog sooner under a heavy debris load, so check them regularly. The cleaner does not replace the pool’s filtration and water treatment.
Before choosing
The 50 µm filter supplied with some other K models is not automatically included here. Allow for the limitations of the supplied 180 µm basket on very fine debris.
Verified supplied equipment
- iGarden KN40 robotic pool cleaner
- supplied 180 µm filter
This overview lists the verified core equipment for this version. Other filter grades and optional accessories are not automatically included.
Care after cleaning
Lift the cleaner by its handle and allow water to drain. Empty the filter and rinse it with clean water; a clogged basket reduces suction. Before charging out of the pool, clean and dry the charging contact as instructed.
Introducing the range: iGarden KN
This video introduces the model range and may show a different version. The exact equipment, filtration and features of this offer are listed in the table and description above.
Video by: iGarden
How to care for your automatic pool cleaner
Regular care helps maintain performance and extend the cleaner’s service life. Refer to the manual for detailed instructions and the operating limits of your model.
- Maintain correct pH and chemical levels. Unsuitable pH or excessive sanitiser concentrations can damage materials and shorten the cleaner’s life.
- Do not leave the cleaner in the pool unnecessarily. Remove the cleaner from the water after the cleaning cycle. Rinse it with clean water, allow it to drain and store it in a dry, ventilated place. Unnecessary prolonged immersion exposes its components to pool chemicals and mineral deposits.
- Clean the filter after every use. Empty and thoroughly rinse the basket or filter bag. A clogged filter restricts water flow and reduces cleaning performance.
- Rinse the entire cleaner after use in salt water. Avoid unnecessary immersion. After removal, thoroughly rinse the exterior, filter compartment and removable filters with clean, unsalted water to remove salt residue. Follow the manual’s rinsing and handling instructions.
Additional parameters
| Category: | Cordless robotic pool cleaners |
|---|---|
| ? Cleaning coverage: | Floor, walls and waterline |
| Robot power supply: | Cordless rechargeable |
| ? Recommended pool length: | 8–10 m |
| ? Filter fineness: | 150 µm and above |
| ? App control: | Yes |
| Filter access: | Top access |
| ? Battery runtime: | 150–240 min |
| ? Transport trolley included: | No |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!