WYBOT M2 VISION robotic pool cleaner
Our pool specialist’s view
Camera assistance locates visible floor debris
Complete cleaning and multiple app modes
A 180 µm basket supplemented by 40 PPI foam
Five hours is a mode-dependent maximum
40 PPI foam does not mean 40 µm filtration
We would recommend M2 VISION for longer operation and more targeted cleaning of visible floor debris. Its camera is a useful navigation aid. A clean filter and suitable programme remain important; a camera alone does not make a pool maintenance-free.
the Poolservis team
WYBOT M2 VISION robotic pool cleaner
M2 VISION suits owners wanting camera-assisted debris detection as well as long runtime. It provides complete pool cleaning with a stated area rating of up to 400 m².
Dimensions and key specifications
| Product code | 60WM2V |
|---|---|
| Cleaning coverage | Floor, walls and waterline |
| Maximum pool floor area | 400 m² |
| Supplied filtration | 180 µm |
| Additional filtration | Foam insert for finer debris |
| Maximum battery runtime | Up to 300 min |
| Charging time | 3 h |
| App control | Yes |
| Filter access | Top access |
| Trolley included | No |
Choosing this cleaner
✓No power cable during cleaning
✓Floor, wall and waterline cleaning
✓Top-access filter
Keep in mind: Five hours is a mode-dependent maximum. The foam’s 40 PPI rating is not 40 µm, and camera assistance does not guarantee collection of every particle.
How this model works in practice
The Dirt Hunting mode uses a camera to locate visible debris on the floor. A gyroscope and additional sensors assist orientation. A 180 µm basket is supplemented by 40 PPI foam; the app provides eight modes including floor, walls, waterline, Eco and Turbo.
Controls and equipment
- A built-in rechargeable battery allows operation without a power cable attached.
- Configure cleaning modes and scheduling in the WYBOT app. App connectivity alone does not mean manual underwater steering is available.
- The camera supports targeted detection of visible debris in AI cleaning mode.
Filtration: what is actually supplied
This version is supplied with 180 µm filtration. A lower micron figure indicates finer filtration. Fine filters clog sooner under a heavy debris load, so check them regularly. The cleaner does not replace the pool’s filtration and water treatment.
Before choosing
Five hours is a mode-dependent maximum. The foam’s 40 PPI rating is not 40 µm, and camera assistance does not guarantee collection of every particle.
Verified supplied equipment
- WYBOT M2 VISION robotic pool cleaner
- supplied 180 µm filter
This overview lists the verified core equipment for this version. Other filter grades and optional accessories are not automatically included.
Product video: WYBOT M2 VISION robotic pool cleaner
Care after cleaning
Lift the cleaner by its handle and allow water to drain. Empty the filter and rinse it with clean water; a clogged basket reduces suction. Before charging out of the pool, clean and dry the charging contact as instructed.
How to care for your automatic pool cleaner
Regular care helps maintain performance and extend the cleaner’s service life. Refer to the manual for detailed instructions and the operating limits of your model.
- Maintain correct pH and chemical levels. Unsuitable pH or excessive sanitiser concentrations can damage materials and shorten the cleaner’s life.
- Do not leave the cleaner in the pool unnecessarily. Remove the cleaner from the water after the cleaning cycle. Rinse it with clean water, allow it to drain and store it in a dry, ventilated place. Unnecessary prolonged immersion exposes its components to pool chemicals and mineral deposits.
- Clean the filter after every use. Empty and thoroughly rinse the basket or filter bag. A clogged filter restricts water flow and reduces cleaning performance.
- Rinse the entire cleaner after use in salt water. Avoid unnecessary immersion. After removal, thoroughly rinse the exterior, filter compartment and removable filters with clean, unsalted water to remove salt residue. Follow the manual’s rinsing and handling instructions.
Additional parameters
| Category: | Cordless robotic pool cleaners |
|---|---|
| ? Cleaning coverage: | Floor, walls and waterline |
| Robot power supply: | Cordless rechargeable |
| ? Filter fineness: | 150 µm and above |
| ? Pool surface: | Liner / PVC, Concrete |
| ? App control: | Yes |
| Filter access: | Top access |
| ? Battery runtime: | Over 240 min |
| ? Transport trolley included: | No |
| ? Maximum pool floor area: | Over 300 m² |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!