WYBOT S2 PRO robotic pool cleaner
Our pool specialist’s view
Automatic return to the charging station
Complete cleaning and seven modes
A 180 µm basket with supplementary foam filtration
The station needs a suitable position and power at the pool edge
Docking does not replace manual filter cleaning
S2 PRO’s main benefit is returning to its charging station, reducing repeated retrieval for charging. We would recommend it where the station can be installed correctly. Check available space at the pool edge and the station’s power requirements before ordering.
the Poolservis team
WYBOT S2 PRO robotic pool cleaner
S2 PRO suits owners wanting to reduce repeated retrieval for charging. It adds return to a pool-edge charging station to full floor, wall and waterline cleaning.
Dimensions and key specifications
| Product code | 60WS2P |
|---|---|
| Cleaning coverage | Floor, walls and waterline |
| Maximum pool floor area | 300 m² |
| Supplied filtration | 180 µm |
| Additional filtration | Foam insert for finer debris |
| Maximum battery runtime | Up to 210 min |
| Charging time | 3 h |
| App control | Yes |
| Filter access | Top access |
| Trolley included | No |
Choosing this cleaner
✓No power cable during cleaning
✓Floor, wall and waterline cleaning
✓Top-access filter
Keep in mind: Check station installation and power requirements in the manual before purchase. A dock does not make operation maintenance-free: the filter still needs removal and cleaning.
How this model works in practice
It returns to its station when battery charge is low. Navigation is supported by a gyroscope, sonar, infrared and depth sensors. Seven modes include floor, walls, waterline, full cleaning, Eco and Turbo. Foam supplements the 180 µm basket.
Controls and equipment
- A built-in rechargeable battery allows operation without a power cable attached.
- Configure cleaning modes and scheduling in the WYBOT app. App connectivity alone does not mean manual underwater steering is available.
- A docking station supports automatic return and recharging; install it to suit the pool edge following the manual.
Filtration: what is actually supplied
This version is supplied with 180 µm filtration. A lower micron figure indicates finer filtration. Fine filters clog sooner under a heavy debris load, so check them regularly. The cleaner does not replace the pool’s filtration and water treatment.
Before choosing
Check station installation and power requirements in the manual before purchase. A dock does not make operation maintenance-free: the filter still needs removal and cleaning.
Verified supplied equipment
- WYBOT S2 PRO robotic pool cleaner
- supplied 180 µm filter
- charging station
This overview lists the verified core equipment for this version. Other filter grades and optional accessories are not automatically included.
Product video: WYBOT S2 PRO robotic pool cleaner
Care after cleaning
Lift the cleaner by its handle and allow water to drain. Empty the filter and rinse it with clean water; a clogged basket reduces suction. Follow the manufacturer’s operating, charging and storage instructions.
How to care for your automatic pool cleaner
Regular care helps maintain performance and extend the cleaner’s service life. Refer to the manual for detailed instructions and the operating limits of your model.
- Maintain correct pH and chemical levels. Unsuitable pH or excessive sanitiser concentrations can damage materials and shorten the cleaner’s life.
- Do not leave the cleaner in the pool unnecessarily. The pool is not a place for permanent storage. This model returns to its charging dock during normal operation; when taking it out of service, remove, rinse and store it in a dry, ventilated place as instructed. Do not leave it in the water unnecessarily outside planned operation.
- Clean the filter after every use. Empty and thoroughly rinse the basket or filter bag. A clogged filter restricts water flow and reduces cleaning performance.
- Rinse the entire cleaner after use in salt water. Avoid unnecessary immersion. After removal, thoroughly rinse the exterior, filter compartment and removable filters with clean, unsalted water to remove salt residue. Follow the manual’s rinsing and handling instructions.
Additional parameters
| Category: | Cordless robotic pool cleaners |
|---|---|
| ? Cleaning coverage: | Floor, walls and waterline |
| Robot power supply: | Cordless rechargeable |
| ? Filter fineness: | 150 µm and above |
| ? Pool surface: | Liner / PVC, Concrete |
| ? App control: | Yes |
| Filter access: | Top access |
| ? Battery runtime: | 150–240 min |
| ? Transport trolley included: | No |
| ? Maximum pool floor area: | 150–300 m² |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!