WYBOT S2 VISION robotic pool cleaner
Our pool specialist’s view
Camera-assisted targeted debris detection
Complete cleaning including the waterline
Settings on the unit and through the app
VISION does not automatically include the PRO charging dock
The supplied version is rated for pools up to 10 × 5 m
We would recommend S2 VISION for camera-assisted debris detection and adjustable cleaning programmes. Matching the supplied version to the recommended pool size matters. VISION, PRO and SOLAR identify different equipment, so distinguish them carefully when choosing.
the Poolservis team
WYBOT S2 VISION robotic pool cleaner
S2 VISION suits owners wanting targeted camera-assisted debris detection during complete pool maintenance. This supplied version is listed for pools up to 10 × 5 m.
Dimensions and key specifications
| Product code | 60WS2V |
|---|---|
| Cleaning coverage | Floor, walls and waterline |
| Maximum pool dimensions | 10 × 5 m |
| Supplied filtration | 180 µm |
| Additional filtration | Foam insert for finer debris |
| Maximum battery runtime | Up to 210 min |
| Charging time | 3.5 h |
| App control | Yes |
| Filter access | Top access |
| Trolley included | No |
Choosing this cleaner
✓No power cable during cleaning
✓Floor, wall and waterline cleaning
✓Top-access filter
Keep in mind: VISION identifies the camera equipment; it does not automatically include the PRO model’s charging station. Match accessories to the exact version.
How this model works in practice
The camera is supported by a gyroscope, infrared and depth sensors. Programmes are available on the unit with extended settings in the app and 30–210-minute cycles. A finer filter supplements the 180 µm basket for smaller particles.
Controls and equipment
- A built-in rechargeable battery allows operation without a power cable attached.
- Configure cleaning modes and scheduling in the WYBOT app. App connectivity alone does not mean manual underwater steering is available.
- The camera supports targeted detection of visible debris in AI cleaning mode.
Filtration: what is actually supplied
This version is supplied with 180 µm filtration. A lower micron figure indicates finer filtration. Fine filters clog sooner under a heavy debris load, so check them regularly. The cleaner does not replace the pool’s filtration and water treatment.
Before choosing
VISION identifies the camera equipment; it does not automatically include the PRO model’s charging station. Match accessories to the exact version.
Verified supplied equipment
- WYBOT S2 VISION robotic pool cleaner
- supplied 180 µm filter
This overview lists the verified core equipment for this version. Other filter grades and optional accessories are not automatically included.
Care after cleaning
Lift the cleaner by its handle and allow water to drain. Empty the filter and rinse it with clean water; a clogged basket reduces suction. Before charging out of the pool, clean and dry the charging contact as instructed.
Video review: WYBOT S2 Vision
An independently published video review. Refer to the description above for this offer’s specifications and supplied equipment.
Video by: Maniaques
How to care for your automatic pool cleaner
Regular care helps maintain performance and extend the cleaner’s service life. Refer to the manual for detailed instructions and the operating limits of your model.
- Maintain correct pH and chemical levels. Unsuitable pH or excessive sanitiser concentrations can damage materials and shorten the cleaner’s life.
- Do not leave the cleaner in the pool unnecessarily. Remove the cleaner from the water after the cleaning cycle. Rinse it with clean water, allow it to drain and store it in a dry, ventilated place. Unnecessary prolonged immersion exposes its components to pool chemicals and mineral deposits.
- Clean the filter after every use. Empty and thoroughly rinse the basket or filter bag. A clogged filter restricts water flow and reduces cleaning performance.
- Rinse the entire cleaner after use in salt water. Avoid unnecessary immersion. After removal, thoroughly rinse the exterior, filter compartment and removable filters with clean, unsalted water to remove salt residue. Follow the manual’s rinsing and handling instructions.
Additional parameters
| Category: | Cordless robotic pool cleaners |
|---|---|
| ? Cleaning coverage: | Floor, walls and waterline |
| Robot power supply: | Cordless rechargeable |
| ? Recommended pool length: | 8–10 m |
| ? Filter fineness: | 150 µm and above |
| ? Pool surface: | Liner / PVC, Concrete |
| ? App control: | Yes |
| Filter access: | Top access |
| ? Battery runtime: | 150–240 min |
| ? Transport trolley included: | No |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!