WYBOT S2 robotic pool cleaner

Not rated Rating details
Brand: WYBOT
WYBOT S2 cleans floor, walls and waterline. For a pool floor area up to 300 m². Supplied filtration: 180 µm. Runtime up to 210 min, depending on mode.
Availability In stock at supplier
Delivery to:
20.10.2026
Code: 60WS2
€739,57 €611,21 excl. VAT Measure price:
WYBOT S2 robotic pool cleaner
Not rated Rating details
Brand: WYBOT
60WS2
Free shipping
Free shipping
Free shipping
from 100 Eur
Bazény na míru
Bazény na míru
stavíme již 23 let
Vrácení zboží
Vrácení zboží
v lhůtě do 30 dní

Our pool specialist’s view

Cleans the floor, walls and waterline

A 180 µm basket supplemented by foam

App-based programme and cleaning-path selection

Does not have the S2 PRO’s charging dock

The finer insert needs more frequent rinsing

We would recommend S2 for complete cleaning, dual-stage filtration and a wider programme choice. It suits maintenance adjusted to current debris conditions. When comparing it with PRO, remember that the standard S2 does not include the PRO charging station.

the Poolservis team

WYBOT S2 robotic pool cleaner

S2 suits private pools where full cleaning, a longer cycle and dual-stage filtration are priorities. The stated area rating is up to 300 m², with up to 210 minutes of operation depending on programme.

Dimensions and key specifications

Product code60WS2
Cleaning coverageFloor, walls and waterline
Maximum pool floor area300 m²
Supplied filtration180 µm
Additional filtrationFoam insert for finer debris
Maximum battery runtimeUp to 210 min
Charging time3 h
App controlYes
Filter accessTop access
Trolley includedNo

Choosing this cleaner

✓No power cable during cleaning

✓Floor, wall and waterline cleaning

✓Top-access filter

Keep in mind: The standard S2 does not have the S2 PRO’s automatic charging dock. The finer insert also requires more frequent rinsing.

WYBOT S2 robotic pool cleaner

How this model works in practice

The 180 µm basket collects coarser debris while a foam insert supplements finer filtration. The app offers cleaning programmes and paths for the floor, walls and waterline. Infrared navigation assists coverage, with approximately three-hour charging.

Controls and equipment

  • A built-in rechargeable battery allows operation without a power cable attached.
  • Configure cleaning modes and scheduling in the WYBOT app. App connectivity alone does not mean manual underwater steering is available.

Filtration: what is actually supplied

This version is supplied with 180 µm filtration. A lower micron figure indicates finer filtration. Fine filters clog sooner under a heavy debris load, so check them regularly. The cleaner does not replace the pool’s filtration and water treatment.

Before choosing

The standard S2 does not have the S2 PRO’s automatic charging dock. The finer insert also requires more frequent rinsing.

Verified supplied equipment

  • WYBOT S2 robotic pool cleaner
  • supplied 180 µm filter

This overview lists the verified core equipment for this version. Other filter grades and optional accessories are not automatically included.

Care after cleaning

Lift the cleaner by its handle and allow water to drain. Empty the filter and rinse it with clean water; a clogged basket reduces suction. Before charging out of the pool, clean and dry the charging contact as instructed.

Manual and technical documentation

Product video: WYBOT S2

Video by: WYBOT Official

How to care for your automatic pool cleaner

Regular care helps maintain performance and extend the cleaner’s service life. Refer to the manual for detailed instructions and the operating limits of your model.

  • Maintain correct pH and chemical levels. Unsuitable pH or excessive sanitiser concentrations can damage materials and shorten the cleaner’s life.
  • Do not leave the cleaner in the pool unnecessarily. Remove the cleaner from the water after the cleaning cycle. Rinse it with clean water, allow it to drain and store it in a dry, ventilated place. Unnecessary prolonged immersion exposes its components to pool chemicals and mineral deposits.
  • Clean the filter after every use. Empty and thoroughly rinse the basket or filter bag. A clogged filter restricts water flow and reduces cleaning performance.
  • Rinse the entire cleaner after use in salt water. Avoid unnecessary immersion. After removal, thoroughly rinse the exterior, filter compartment and removable filters with clean, unsalted water to remove salt residue. Follow the manual’s rinsing and handling instructions.

Additional parameters

Category: Cordless robotic pool cleaners
? Cleaning coverage: Floor, walls and waterline
Robot power supply: Cordless rechargeable
? Filter fineness: 150 µm and above
? Pool surface: Liner / PVC, Concrete
? App control: Yes
Filter access: Top access
? Battery runtime: 150–240 min
? Transport trolley included: No
? Maximum pool floor area: 150–300 m²

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Vložením hodnocení souhlasíte s podmínkami ochrany osobních údajů

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů