Zodiac OP-Li 2100 - PIXEL robotic pool cleaner

Not rated Rating details
Brand: Zodiac
Zodiac OP-Li 2100 - PIXEL cleans floor only. For pools up to 7 × 3 m. Supplied filtration: 150 µm. Runtime up to 90 min, depending on mode.
Availability In stock at supplier
Delivery to:
20.10.2026
Code: 6069232
€571,43 €472,26 excl. VAT Measure price:
Zodiac OP-Li 2100 - PIXEL robotic pool cleaner
Not rated Rating details
Brand: Zodiac
Zodiac OP-Li 2100 - PIXEL robotic pool cleaner
Free shipping
Free shipping
Free shipping
from 100 Eur
Bazény na míru
Bazény na míru
stavíme již 23 let
Vrácení zboží
Vrácení zboží
v lhůtě do 30 dní

Our pool specialist’s view

Battery operation without a power cable

Simple start-up without a phone

Top-access 150 µm basket for easy rinsing

Cleans the floor only, not walls or the waterline

Approximately four-hour charging for up to 90 minutes of runtime

We would recommend OP-Li 2100 to an owner of a smaller pool wanting simple start-and-clean operation. The top-access filter makes routine care easier. If wall cleaning is required, we would choose a model that explicitly includes it.

the Poolservis team

Zodiac OP-Li 2100 - PIXEL robotic pool cleaner

PIXEL OP-Li 2100 suits smaller pools up to 7 × 3 m when convenient floor cleaning is the priority. Its battery replaces the power cable and operation does not require a phone.

Dimensions and key specifications

Product code6069232
Cleaning coverageFloor only
Maximum pool dimensions7 × 3 m
Supplied filtration150 µm
Maximum battery runtimeUp to 90 min
Charging time4 h
App controlNo
Filter accessTop access
Trolley includedNo

Choosing this cleaner

✓No power cable during cleaning

✓Straightforward floor maintenance

✓Top-access filter

Keep in mind: This version cleans the floor only. Do not confuse it with the OP 32, which also cleans walls.

Zodiac OP-Li 2100 - PIXEL robotic pool cleaner

How this model works in practice

The 150 µm basket lifts out from above for rinsing after use. The cleaner offers up to 90 minutes of operation and approximately four-hour charging. Its strength is straightforward use without configuring an app.

Controls and equipment

  • A built-in rechargeable battery allows operation without a power cable attached.
  • This model cleans the floor only. Choose another cleaner for wall and waterline cleaning.

Filtration: what is actually supplied

This version is supplied with 150 µm filtration. A lower micron figure indicates finer filtration. Fine filters clog sooner under a heavy debris load, so check them regularly. The cleaner does not replace the pool’s filtration and water treatment.

Before choosing

This version cleans the floor only. Do not confuse it with the OP 32, which also cleans walls.

Verified supplied equipment

  • Zodiac OP-Li 2100 - PIXEL robotic pool cleaner
  • supplied 150 µm filter

This overview lists the verified core equipment for this version. Other filter grades and optional accessories are not automatically included.

Care after cleaning

Lift the cleaner by its handle and allow water to drain. Empty the filter and rinse it with clean water; a clogged basket reduces suction. Before charging out of the pool, clean and dry the charging contact as instructed.

Manual and technical documentation

Product video: Zodiac PIXEL OP-Li 2100

Video by: Swim & Fun Scandinavia

How to care for your automatic pool cleaner

Regular care helps maintain performance and extend the cleaner’s service life. Refer to the manual for detailed instructions and the operating limits of your model.

  • Maintain correct pH and chemical levels. Unsuitable pH or excessive sanitiser concentrations can damage materials and shorten the cleaner’s life.
  • Do not leave the cleaner in the pool unnecessarily. Remove the cleaner from the water after the cleaning cycle. Rinse it with clean water, allow it to drain and store it in a dry, ventilated place. Unnecessary prolonged immersion exposes its components to pool chemicals and mineral deposits.
  • Clean the filter after every use. Empty and thoroughly rinse the basket or filter bag. A clogged filter restricts water flow and reduces cleaning performance.
  • Rinse the entire cleaner after use in salt water. Avoid unnecessary immersion. After removal, thoroughly rinse the exterior, filter compartment and removable filters with clean, unsalted water to remove salt residue. Follow the manual’s rinsing and handling instructions.

Additional parameters

Category: Cordless robotic pool cleaners
? Cleaning coverage: Floor only
Robot power supply: Cordless rechargeable
? Recommended pool length: Up to 8 m
? Filter fineness: 120–150 µm, 150 µm and above
? Pool surface: Liner / PVC, Fibreglass, Concrete, Ceramic tiles and mosaic
? App control: No
Filter access: Top access
? Battery runtime: Up to 90 min
? Transport trolley included: No

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Vložením hodnocení souhlasíte s podmínkami ochrany osobních údajů

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů