Zodiac SPAbot robotic pool cleaner
Our pool specialist’s view
Designed specifically for spas up to 3 × 3 m
Cleans the floor, seats and waterline
Floats up after the cycle for easier retrieval
Not a substitute for a swimming-pool cleaner
The manual’s water-depth and temperature limits must be observed
For a spa, SPAbot makes more sense than an oversized swimming-pool cleaner. It targets the spa floor and seats and also helps with the waterline. We would first check the depth and operating conditions of the particular spa.
the Poolservis team
Zodiac SPAbot robotic pool cleaner
SPAbot is designed for spas, cleaning their floor, seats and waterline. It suits installations where a conventional swimming-pool robot would be oversized or unsuitable.
Dimensions and key specifications
| Product code | 6069130 |
|---|---|
| Cleaning coverage | Floor, walls and waterline |
| Maximum pool dimensions | 3 × 3 m |
| Supplied filtration | 100 µm |
| Maximum battery runtime | Up to 60 min |
| Charging time | 6 h |
| App control | No |
| Filter access | Top access |
| Trolley included | No |
Choosing this cleaner
✓No power cable during cleaning
✓Floor, wall and waterline cleaning
✓Top-access filter
Keep in mind: It is not a substitute for a standard swimming-pool robot. Check the manual’s depth and operating-temperature limits before use.
How this model works in practice
Debris is collected in a one-litre filter accessed from above. The cleaner floats up when its cycle ends to simplify retrieval. It is intended for spas up to 3 × 3 m, with an operating depth of approximately 0.25–1.6 m.
Controls and equipment
- A built-in rechargeable battery allows operation without a power cable attached.
- A dedicated spa robot cleans the floor, seats and waterline. It floats when finished for easy retrieval. It is not intended for a standard swimming pool.
Filtration: what is actually supplied
This version is supplied with 100 µm filtration. A lower micron figure indicates finer filtration. Fine filters clog sooner under a heavy debris load, so check them regularly. The cleaner does not replace the pool’s filtration and water treatment.
Before choosing
It is not a substitute for a standard swimming-pool robot. Check the manual’s depth and operating-temperature limits before use.
Verified supplied equipment
- Zodiac SPAbot robotic pool cleaner
- supplied 100 µm filter
This overview lists the verified core equipment for this version. Other filter grades and optional accessories are not automatically included.
Care after cleaning
Lift the cleaner by its handle and allow water to drain. Empty the filter and rinse it with clean water; a clogged basket reduces suction. Before charging out of the pool, clean and dry the charging contact as instructed.
Product video: Zodiac SPAbot OS 0800
Video by: Pools and More
How to care for your automatic pool cleaner
Regular care helps maintain performance and extend the cleaner’s service life. Refer to the manual for detailed instructions and the operating limits of your model.
- Maintain correct pH and chemical levels. Unsuitable pH or excessive sanitiser concentrations can damage materials and shorten the cleaner’s life.
- Do not leave the cleaner in the pool unnecessarily. Remove the cleaner from the water after the cleaning cycle. Rinse it with clean water, allow it to drain and store it in a dry, ventilated place. Unnecessary prolonged immersion exposes its components to pool chemicals and mineral deposits.
- Clean the filter after every use. Empty and thoroughly rinse the basket or filter bag. A clogged filter restricts water flow and reduces cleaning performance.
- Rinse the entire cleaner after use in salt water. Avoid unnecessary immersion. After removal, thoroughly rinse the exterior, filter compartment and removable filters with clean, unsalted water to remove salt residue. Follow the manual’s rinsing and handling instructions.
Additional parameters
| Category: | Cordless robotic pool cleaners |
|---|---|
| ? Cleaning coverage: | Floor, walls and waterline |
| Robot power supply: | Cordless rechargeable |
| ? Recommended pool length: | Up to 8 m |
| ? Filter fineness: | 60–120 µm |
| ? App control: | No |
| Filter access: | Top access |
| ? Battery runtime: | Up to 90 min |
| ? Transport trolley included: | No |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!