sWP 11 Rapid X20 inverter pool pump – 230 V
Adjust filtration to your pool’s daily needs. The sWP 11 Rapid X20 inverter pump offers variable operation from 30–100%, four daily timers and an instant power-consumption display.
- Flow at 10 m head: 10.5 m³/h; maximum flow 20.7 m³/h.
- 230 V supply, P1 input 0.66 kW.
- One-touch backwash and external control.
For pools of 20–40 m³ according to the supplier’s manual. We can help match it to your filter and pipework.
Pool specialist’s opinion
- + Variable speed lets you set a suitable filtration rate.
- + Four timers and a consumption display make daily operation easier.
- + One-touch backwash mode.
- − The filter and pipework still determine the usable flow.
- − Integration with an automatic valve requires a compatibility check.
Our recommendation: sWP 11 Rapid X20 is a practical choice when you want to adjust filtration speed during the day. Select the pump using its flow at the expected system head. Share your filter and pipework details and we will help check the match.
Poolservis team
Variable-speed filtration
The permanent-magnet motor and integrated inverter allow operation from 30 to 100%. Set up to four daily timers, view current power consumption and use the backwash function. External control is available through a digital input; a relay output is also provided. The pump is self-priming and has a prefilter.
Technical specifications
| Model / supplier code | sWP 11 Rapid X20 / 573SWP011 |
| Recommended pool volume | 20–40 m³ |
| Flow at 10 m / 8 m head | 10.5 / 14.7 m³/h |
| Maximum flow / maximum head | 20.7 m³/h / 15 m |
| P1 input / P2 output | 0.66 / 0.53 kW |
| Power supply | 230 V, 50–60 Hz |
| Inlet / outlet | 63 / 63 mm; 2-inch ports |
| Operating range / motor speed | 30–100% / 880–3,220 rpm |
| Motor protection | IP55 |
| Maximum water temperature / pressure | 50 °C / 3 bar |
| Water type | Freshwater and saltwater, up to 35 g/l |
| Dimensions without connection unions | 579.5 × 254 × 294 mm |
Dimensions and installation
The body measures 579.5 × 254 × 294 mm without connection unions; the inlet centre is 197 mm above the base. Leave clearance above the lid to remove the basket and at least 150 mm around the motor for ventilation. The manual recommends 63 mm pipework and installation no more than 2 m above water level.
Compatibility with iWash
Vagnerpool requires modified firmware when this pump is used with an automatic iWash multiport valve. Request this firmware when ordering and check the control connection before installation.
Selection and maintenance
Maximum flow and maximum head are separate operating limits. For filter sizing, use the performance curve and the flow at your system head. Prime the pump before starting, never run it dry, and isolate power and release pressure before cleaning the basket. Install in a sheltered, ventilated location protected from flooding and frost.
Official instructions
Additional parameters
| Category: | Swimming pool pumps |
|---|---|
| Weight: | 14 kg |
| EAN: | 8594060081298 |
| ? Doporučený objem bazénu (orientační): | 20–40 m³ |
| Napájení: | 230 V jednofázové |
| Použití čerpadla: | Bazénová filtrace |
| Průtok čerpadla: | 10–15 m³/h |
| Připojení sání: | Lepení 63 mm |
| Připojení výtlaku: | Lepení 63 mm |
| Regulace otáček: | S regulací otáček |
| Samonasávací: | Ano |
| Typ produktu: | Filtrační čerpadlo |
| Vhodné pro slanou vodu: | Ano |
| Flow at 10 m head: | 10.5 m³/h |
| Maximum flow: | 20.7 m³/h |
| P1 input / P2 output: | 0.66 / 0.53 kW |
| Power supply: | 230 V, 50–60 Hz |
| Inlet / outlet: | 63 / 63 mm; 2-inch ports |
| Speed control: | Inverter, 30–100% |
| Daily timers: | Up to 4 |
| Water type: | Freshwater and saltwater, up to 35 g/l |
| Motor protection: | IP55 |
| Max. water temperature / pressure: | 50 °C / 3 bar |
| Dimensions without connection unions: | 579.5 × 254 × 294 mm |
| Maximum head: | 15 m |
| Recommended pool volume: | 20–40 m³ |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!