NORM EVO - 10 kW pool heat pump
NORM EVO - 10 kW pool heat pump
Pool heat pump with a heating output of 10 kW. For water heating. Power supply: 230 V.
Dimensions and technical specifications
| Noise level | 40.8 - 53.8 dB |
|---|---|
| Power supply | 230 V |
| Colour | White |
| Flow monitoring | Yes |
| Heating output | 10 kW |
| Operating temperature | +5 ~ +43 °C |
| Recommended water flow | 2 - 3 m³/h |
| Rated current | 1-7.26 A |
| Rated input power | 0.23-1.67 kW |
| Net / shipping weight | 47 kg |
| Electronic expansion valve | Yes |
| Refrigerant | R32 |
| Cooling | No |
| Efficiency | 10.1 - 6.1 COP |
| Easy installation | Yes |
| Energy saving | Yes |
| Defrosting | Yes |
| Connection | 50 mm |
| Product type | Step Inverter heat pump |
| Supplier part number | 565NE10 |
Features and control
- Step Inverter technology.
- For pool water heating; this range does not provide cooling.
Choosing the right output
The pool-volume filter uses our approximate rule of 1 kW of heating output per 3.5 m³ of water. The manufacturer's recommended volume is shown separately above. Actual performance depends on outdoor and water temperatures, pool cover and the required swimming season. Compare heating outputs under the same test conditions.
Installation and winter shutdown
Install outdoors with unobstructed airflow and follow the manufacturer's requirements for water flow, clearances, condensate drainage and electrical connection. Follow the operating manual when draining and shutting down the unit for winter.
Manufacturer documentation
Additional parameters
| Category: | Pool Heat Pumps |
|---|---|
| Weight: | 52 kg |
| ? Recommended pool volume (approx.): | 20–40 m³ |
| Heating output (kW): | 8–12 kW |
| Water cooling: | No |
| Power supply: | 230 V single-phase |
| Heat pump control: | Step Inverter |
| Product type: | Heat pump |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!