RAPID Inver-X 11.3 kW – 13.5 kW with cooling pool heat pump
RAPID Inver-X 11.3 kW – 13.5 kW with cooling pool heat pump
Pool heat pump with a heating output of 11.3 kW. For heating and cooling. Power supply: 230 V. Manufacturer recommended pool volume: 25 - 50 m³.
Dimensions and technical specifications
| Unit dimensions (width / depth / height) | 893 x 432 x 650 mm |
|---|---|
| Dimensions (Bazenonline specification) | 893 x 432 x 650 mm |
| Power supply | 230 V |
| Colour | Black / aluminium |
| Suitable for salt water up to 5 g/l (<0.5%) | Yes |
| Housing material | Aluminium |
| Coil material | Titanium |
| Flow monitoring | Yes |
| Digital display | Yes |
| Heating output | 11.3 kW |
| Manufacturer recommended pool volume | 25 - 50 m³ |
| Operating temperature | -15 ~ +43 °C |
| Recommended water flow | 3 - 4 m³/h |
| Rated current | 0.96 - 7.82 A |
| Rated input power | 0.22 - 1.8 kW |
| Heat exchanger | Plastic |
| Net / shipping weight | 61 kg |
| Refrigerant | R32 |
| Cooling | Yes |
| Efficiency | up to 15.5 COP |
| Energy saving | Yes |
| Defrosting | Yes |
| Connection | 50 mm |
| Product type | Inverter heat pump |
| Cooling output | 5.8 kW |
| Supplier part number | 565RIXC036 |
Features and control
- Inverter control adjusts the output to the heating demand.
- Pool water heating and cooling.
- Built-in Wi-Fi for remote control.
Choosing the right output
The pool-volume filter uses our approximate rule of 1 kW of heating output per 3.5 m³ of water. The manufacturer's recommended volume is shown separately above. Actual performance depends on outdoor and water temperatures, pool cover and the required swimming season. Compare heating outputs under the same test conditions.
Installation and winter shutdown
Install outdoors with unobstructed airflow and follow the manufacturer's requirements for water flow, clearances, condensate drainage and electrical connection. Follow the operating manual when draining and shutting down the unit for winter.
Manufacturer documentation
Additional parameters
| Category: | Pool Heat Pumps |
|---|---|
| Weight: | 70 kg |
| ? Recommended pool volume (approx.): | 20–40 m³ |
| Heating output (kW): | 8–12 kW |
| Water cooling: | Yes |
| Power supply: | 230 V single-phase |
| Heat pump control: | Full Inverter |
| Product type: | Heat pump |
| Wi-Fi included: | Yes |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!