Currency
EUR
Language
English
Registration

Urea No. 2 for digital photometers – 2 ml

Not rated Rating details
Brand: Water I.D.

Urea No. 2 by Water-i.d. for urea testing with a compatible digital photometer. The sales unit contains 2 ml. Use with the other reagents specified by the method; this reagent alone is not a complete test. See the product description for PoolLab 2.0 instructions and required equipment. For water analysis only.

Availability On request
Code: WID-UREA2-2ML
€66,91 €55,30 excl. VAT Measure price:
Urea No. 2 for digital photometers – 2 ml
Not rated Rating details
Brand: Water I.D.
Free shipping
Free delivery within Czechia
On orders over CZK 2,350. Special transport conditions apply.
Custom-built swimming pools
Custom-built swimming pools
Building swimming pools since 1995
Returns
Returns
within 30 days

Urea No. 2: reagent for urea analysis

Urea No. 2 by Water-i.d. is a liquid reagent for photometric urea measurement. Replace the specific reagent without buying a new testing instrument. Reliable results require the correct program, sample preparation and reagent combination.

What is included

2 ml of Urea No. 2. The price and order quantity refer to this sales unit, not to the manufacturer’s wholesale box.

Other required reagents / equipment: Urea No. 1; Ammonia No. 1 + No. 2. Other reagents and the photometer are not included.

Parameter Value
Manufacturer Water-i.d.
Form Liquid
Sales unit 2 ml
PoolLab 2.0 method UREA
PoolLab 2.0 range 0.1–2.5 mg/l (NH₂)₂CO
Other reagents / equipment Urea No. 1; Ammonia No. 1 + No. 2

Quick measurement instructions – PoolLab 2.0

  1. Measure 10 ml of sample water into a clean chamber. Close the cover and perform ZERO without reagents.
  2. Select Urea (UREA); on PoolLab 2.0, test on its own in the middle chamber T2. If chlorine is present, carry out the pretreatment specified by the current method version. Older instructions specify Dechlor; a newer method may specify Urea Pretreat.
  3. Add 2 drops of PL Urea No. 1, followed by 1 drop of PL Urea No. 2, and mix. Observe a reaction time of 5 minutes.
  4. Add the entire contents of 1 Ammonia No. 1 sachet and dissolve completely; then add the entire contents of 1 Ammonia No. 2 sachet and dissolve completely.
  5. Close the cover, start OK/TEST and wait until the countdown finishes. Read the result in the units of the selected method.

Do not skip the instrument countdown. Use clean equipment and rinse the chamber and stirring rod thoroughly after testing. Check exact conditions, pretreatment and possible interferences in the manufacturer’s instructions.

Digital photometer compatibility

The stated procedure and measuring range apply to the corresponding PoolLab 2.0 method. For another photometer, use this reagent only if its manufacturer specifies this exact reagent and procedure. A matching parameter name alone does not establish compatibility. Do not confuse No. 1 with No. 2 or LR (low range) with HR (high range).

Storage and handling

Keep in the original tightly closed packaging as directed by the manufacturer. Prevent contamination, check the expiry date and follow the label and safety data sheet for the supplied batch. For analysis of a water sample only; do not add directly to pool water. Keep out of reach of children.

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Security check

Vložením hodnocení souhlasíte s podmínkami ochrany osobních údajů

Discussion

Be the first who will post an article to this item!

Do not fill out this field

Security check

Vložením komentáře souhlasíte s podmínkami ochrany osobních údajů