Winner 100 M pool pump – 18 m³/h, 230 V
Reliable filtration for freshwater and saltwater pools. The SACI Winner 100 M delivers 18 m³/h at 10 m head and features a large prefilter with a transparent lid.
- Easy maintenance: inspect the basket through the lid and open it with the supplied two-handed key.
- Ready for 63 mm pipework: two connection unions are included.
- Single-phase 230 V: P1 input 1.06 kW, P2 output 0.75 kW.
Also suitable for seawater. Contact us for help matching the pump to your filter and pipework.
Pool specialist’s opinion
- + Large basket and transparent lid make routine inspection easy.
- + Manufacturer-approved for saltwater and seawater.
- + 63 mm unions and a lid key are included.
- − Single-speed motor without variable-speed adjustment.
- − Adapters are required for 50 mm pipework.
Our recommendation: Choose the Winner 100 M when your filter can use 18 m³/h at 10 m head and a single-phase 230 V supply is available. For a replacement, check connection positions and maintenance clearance. Send us your filter and pipework details for help checking compatibility.
Poolservis team
Built for everyday filtration
This self-priming SACI PUMPS model has a large prefilter with a transparent lid. The pump body and diffuser are made of glass-fibre-reinforced polypropylene. The AISI 316 stainless-steel shaft does not contact the pumped water. Each pump is individually tested.
Technical specifications
| Specification | Value |
|---|---|
| Model / supplier code | Winner 100 M / 573WIN100M |
| Flow at 10 m head | 18 m³/h |
| Power supply | 230 V, single-phase |
| P1 input / P2 output | 1.06 / 0.75 kW |
| Current | 5.5 A |
| Speed / protection | 2,900 rpm / IP55 |
| Inlet / outlet | 63 / 63 mm, solvent weld |
| Maximum water temperature / pressure | 40 °C / 2.5 bar |
| Water type | Freshwater, saltwater and seawater |
Dimensions and installation clearance
The SACI drawing specifies Winner 100 length L = 550 mm, height E = 325 mm, inlet centre height A = 216 mm and base width F = 206 mm. The two-handed lid key extends beyond the pump body (H = 400 mm); this is not the base width. L1, A1 and H1 refer to packaging. Use the individual drawing dimensions when replacing a pump and leave room to remove the basket and ventilate the motor.
Manufacturer data sheet with performance curve and dimensions (PDF)
Included equipment
Pump with motor, prefilter, basket and transparent lid, lid key and connection unions for 63 mm solvent-weld pipework.
Selection and maintenance
Actual flow depends on the filter resistance, pipework and elevation. Match the performance curve to the filter’s permitted flow. Prime the pump before starting and never run it dry. Clean the basket regularly; isolate the power and release system pressure before opening. Protect the motor from flooding and provide ventilation. Electrical installation must be performed by a qualified professional.
Instructions
Additional parameters
| Category: | Swimming pool pumps |
|---|---|
| Weight: | 14.2 kg |
| ? Doporučený objem bazénu (orientační): | 60–80 m³ |
| Napájení: | 230 V jednofázové |
| Použití čerpadla: | Bazénová filtrace |
| Průtok čerpadla: | 15–20 m³/h |
| Připojení sání: | Lepení 63 mm |
| Připojení výtlaku: | Lepení 63 mm |
| Regulace otáček: | Bez regulace |
| Samonasávací: | Ano |
| Typ produktu: | Filtrační čerpadlo |
| Vhodné pro slanou vodu: | Ano |
| Flow at 10 m head: | 18 m³/h |
| Power supply: | 230 V – single-phase |
| P1 input / P2 output: | 1.06 / 0.75 kW |
| Inlet / outlet: | 63 / 63 mm – solvent weld |
| Self-priming: | Yes |
| Speed control: | No – single speed |
| Water type: | Freshwater, saltwater and seawater |
| Motor protection: | IP55 |
| Max. water temperature / pressure: | 40 °C / 2.5 bar |
| Length L / height E in drawing: | 550 / 325 mm |
| Base width F: | 206 mm |
| Inlet centre height A: | 216 mm |
| Connection unions included: | 2 pcs – for 63 mm pipework |
Discussion
Be the first who will post an article to this item!
Product rating
Be the first who will post an article to this item!