BADU Top II 8 (Bettar) pool pump – 8 m³/h, 230 V
BADU Top II 8 (Bettar) self-priming pool pump, 8 m³/h, 230 V. Power input 0.58 kW, motor output 0.30 kW. Internal suction / discharge threads: 2″ / 1½″. Fresh and salt water up to 5 g/l. Dimensions: 490 × 196 × 300 mm.
Pool specialist’s opinion
Check connection threads and positions before replacing a pump. Actual flow depends on the filter and pipework resistance.
+ Accessible prefilter
+ Salt water up to 5 g/l
− Single speed without speed control
Poolservis team
BADU Top II 8 (Bettar)
Self-priming pool circulation pump with a strainer basket for use with a filtration system.
Technical specifications
| Flow rate | 8 m³/h |
|---|---|
| Supply | 230 V |
| Power input P1 / output P2 | 0.58 / 0.30 kW |
| Rated current | 2.6 A |
| Speed per supplier | 2,840 rpm |
| Suction / discharge | Internal thread Rp 2″ / Rp 1½″ |
| Dimensions L × W × H | 490 × 196 × 300 mm, brochure dimensions for the single-phase version |
| Protection per supplier | IP54 |
| Maximum pressure | 2.5 bar |
| Salt water | Up to 5 g/l (0.5%) |
| Product code | 570318B |
Dimensions and performance curve
The official brochure includes a dimensional drawing and Q/H chart. Use the BETTAR 8 curve: Q is flow in m³/h and H is head in metres of water column. Allow approximately 120 mm behind the motor and 140 mm above the lid for servicing.
Official brochure – dimensions and performance curves
Installation
Prime the prefilter before starting. Protect the motor against flooding and frost. Never run the pump dry.
Additional parameters
| Category: | Swimming pool pumps |
|---|---|
| Weight: | 11 kg |
| EAN: | 4260673450700 |
| ? Doporučený objem bazénu (orientační): | 20–40 m³ |
| Napájení: | 230 V jednofázové |
| Použití čerpadla: | Bazénová filtrace |
| Průtok čerpadla: | 6–10 m³/h |
| Připojení sání: | Vnitřní závit 2″ |
| Připojení výtlaku: | Vnitřní závit 1½″ |
| Regulace otáček: | Bez regulace |
| Samonasávací: | Ano |
| Typ produktu: | Filtrační čerpadlo |
| Vhodné pro slanou vodu: | Ano |
| Značka: | Badu |
| Flow rate: | 8 m³/h |
| Voltage: | 230 V |
| Power input P1: | 0.58 kW |
| Motor output P2: | 0.30 kW |
| Speed: | 2,840 rpm |
| Self-priming: | Yes |
| Salt water: | Up to 5 g/l (0.5%) |
| Motor protection: | IP54 |
| Maximum operating pressure: | 2.5 bar |
| Water temperature per brochure: | 40 °C for GS approval; designed for up to 60 °C |
| Suction / discharge internal threads: | Rp 2″ / Rp 1½″ |
| Dimensions L × W × H: | 490 × 196 × 300 mm (230 V) |
| Rated current: | 2.6 A |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!