Alkorplan Touch pool liner – Origin, 1.65 m width, sold by the metre
ALKORPLAN TOUCH Origin pool liner is a premium 3D pool liner made from multilayer PVC with polyester reinforcement, providing high strength, dimensional stability and a long service life.
Sold by the metre: the price is for a piece measuring 1.65 m × 1 linear metre in length.
For example, if you need 1.65 m × 5 m, add 5 units to your basket.
Liner thickness: 2.0 mm
Liner width: 1.65 m
Pool specialist opinion
- Premium 3D texture with a luxurious appearance
- 2.0 mm thickness for maximum durability
- Protective acrylic layer against stains and UV
- Very long service life and colour stability
- Higher purchase price than standard liners
- Professional installation recommended
“ALKORPLAN TOUCH is among the most luxurious pool liners on the market. Its 3D texture and substantial construction give the pool a natural, exclusive appearance. The Origin model is particularly popular for modern designer pools.”
The Poolservis team
Luxury pool liner with a 3D texture
The ALKORPLAN TOUCH Origin pool liner belongs to a premium range featuring a raised 3D texture that gives your pool an elegant, natural appearance. It makes the water look luxurious, clean and highly attractive.
The liner is made from multilayer PVC with polyester reinforcement, providing high strength, flexibility and dimensional stability. A special protective acrylic layer protects the surface against UV radiation, chemicals and dirt deposits, and increases resistance to mechanical wear.
Its robust construction and 2.0 mm thickness make this one of the most durable pool liners available on the market.
Our experience shows that, with correct installation and maintenance, the liner typically has a service life of 20 years or more. The material is designed to withstand temperature fluctuations, including summer heat and winter frost, as well as prolonged exposure to water.
Let us calculate how much pool liner you need
Send us the pool dimensions (length, width and depth), shape, and details of any steps, benches or overflow. Based on this information, we will prepare:
- a clear calculation of the required liner length
- a cutting plan for the individual strips
- an estimated recommendation for the number of rolls
See the example liner cutting plan below.
We usually reply within 1 working day.
Email us at: info@chemie-bazen.cz
Water appearance — natural stone look
The Origin pattern gives the water a natural, stone-inspired shade. It creates a timeless, clean and natural pool appearance. The textured surface also improves slip resistance and feels pleasant underfoot.
Example of the actual water appearance in a pool lined with ALKORPLAN TOUCH Origin.
Ideal dimensions for efficient installation
A roll width of 1.65 m and length of 25 m allow efficient installation with minimal welds, making installation faster and joints more secure.
Applications of ALKORPLAN TOUCH pool liner
This premium pool liner is suitable for a wide range of pool constructions:
- Outdoor and indoor pools
- Skimmer and overflow pools
- Freshwater and saltwater pools
- New and renovated pools
- Concrete pools
- Pools built with permanent formwork
- Pools built with polystyrene blocks
- Steel-wall pools
- Wooden pools
For this liner colour, we recommend this matching original liquid PVC for finishing details
Example calculation and cutting plan — 5.5 × 3 × 1.5 m pool
Brief: a rectangular pool without steps. The roll is 1.65 m wide. Wall pieces use the full liner width of 1.65 m (even for a 1.5 m deep pool, the extra 15 cm cannot be used for anything else: the liner folds at the top and bottom, so only a small strip may remain. For a 1.55 m deep pool, there will be no trimming waste).
Cutting plan (each piece must be continuous)
Walls (each as one continuous piece):
- 3.1 m + 3.1 m + 5.6 m + 5.6 m = 17.4 linear metres
Floor (1.65 m wide strips):
- the floor is 3 m wide → you need 2 strips (2 × 1.65 = 3.3 m)
- 2 × 5.5 m = 11.0 linear metres
Total length of the pieces
17.4 linear metres (walls) + 11.0 linear metres (floor) = 28.4 linear metres
Why “25 m + 3.4 m” is not enough
You cut pieces from the roll in sequence, and each piece must be continuous. For example, an efficient arrangement within one 25 m roll is:
- Roll 1: 5.6 + 5.6 + 3.1 + 3.1 + 5.5 = 22.9 m (approximately 2.1 m remains)
- Roll 2: the remaining floor strip is 5.5 m long
Result: 1 full roll (25 m) + an additional 5.5 linear metres
Allow a larger margin for pools with steps, benches, rounded corners or overflow channels.
Quality confirmed by customers
Customers particularly appreciate how easy the liner is to work with, its strength and its long service life. It meets the demands of modern pool operation.
Installation recommendations
When installing the liner, ensure a well-prepared base and precise welding of the joints. For maximum service life and a perfect appearance, we recommend using a professional installer experienced with pool liners.
ALKORPLAN TOUCH pool liner structure
Diagram of the multilayer construction of ALKORPLAN TOUCH pool liner.
The liner uses an advanced multilayer construction. The top layer is a protective acrylic layer with a 3D design, protecting the surface against UV radiation, chemical exposure and dirt deposits.
Beneath it are high-quality PVC layers, providing flexibility, colour stability and high mechanical resistance. The central polyester reinforcement mesh significantly increases the strength of the material and prevents deformation.
The bottom PVC layer provides a firm connection to the base and keeps the pool watertight over the long term.
This construction makes ALKORPLAN TOUCH one of the most reliable and durable liners used in modern pools.
Additional parameters
| Category: | Piping + pool construction |
|---|---|
| Weight: | 111 kg |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!