Rapid Inverter RIC26 (IPHCR26) heat pump – 10.5 kW, with cooling, pools up to 45 m³
The Rapid Inverter RIC 26 heat pump is ideal for long-term, efficient pool water heating. Its inverter technology achieves significantly higher efficiency than conventional heat pumps, providing economical, stable operation even in more demanding conditions. Compared with conventional models, it delivers up to twice the output with lower energy consumption. Lower consumption therefore offsets the higher purchase price.
| Free extras from us |
|---|
| Winter cover – link to the cover |
| 3-year warranty |
| Free delivery |
| Free bypass |
| Heat pump features |
|---|
| For pools of 25–45 m³ |
| Electrical power input: 0.19–1.5 kW |
| For salt water and fresh water |
| Cooling included, so the pool can also be cooled |
Pool specialist opinion – review
- + Inverter technology for efficient heating
- Low noise thanks to a slow-speed fan
- Highly efficient titanium heat exchanger
- Output adjustable from 20% to 100%
“Rapid Inverter RIC is an ideal choice for those seeking a powerful heat pump to heat their pool quickly or keep it warm even in extreme conditions. Its inverter technology efficiently adapts the output to achieve high efficiency with minimal running costs.”
The Poolservis team
Economical and efficient heat pump
Rapid Inverter uses step-inverter technology that allows manual output adjustment from 20% to 100%. This optimises energy consumption and heats pool water efficiently without unnecessary costs. At the start of the season, the pump runs at full output to reach the desired temperature quickly. During the season, it automatically adapts its output to maintain the temperature with minimal energy consumption.
_2.jpg)
Example installation on concrete blocks with vibration isolators for noise reduction. (The pump is raised because of snow in winter.)
Another installation example and a close-up of the control panel
_1.jpg)
Technical specifications of the Rapid Inverter heat pump
.jpg)
Removing the side cover when connecting the pool heat pump reveals the titanium heat exchanger. A cable can be connected to the terminal block and then to the control cabinet to switch the heat pump on when the filtration pump motor is running. Set the temperature on the heat pump; while the filtration motor is running, the inverter heat pump heats the water to the specified temperature.
The second option is to connect it to the filtration motor and switch the filtration motor on whenever the pool needs heating to the set temperature.
Connecting the heat pump to an existing filtration system
- Always connect the heat pump via a bypass so it can be isolated and does not cool the water when not in use.
- The heat pump is supplied with union nuts and tailpieces for connecting it to 50 mm pipes.
.jpg)
| Technical specifications | Value |
|---|---|
| For pools | 25–45 m³ |
| Heating output | up to 10.5 kW |
| Recommended water flow | 3–4 m³/h |
| Power input | 0.19–1.5 kW |
| Voltage | 230 V |
| Current | 0.83–6.5 A |
| C.O.P. | 7.4–15 (ratio of heat output to electrical energy input, using heat from the air) |
| Operating temperature | -7 to 43 °C |
| Dimensions | 894 × 359 × 648 mm |
| Weight | 49 kg |
Additional parameters
| Category: | Pool Heat Pumps |
|---|---|
| Weight: | 50 kg |
| ? Recommended pool volume (approx.): | 20–40 m³ |
| Heating output (kW): | 8–12 kW |
| Water cooling: | Yes |
| Power supply: | 230 V single-phase |
| Heat pump control: | Full Inverter |
| Product type: | Heat pump |
| Brand: | Vagnerpool |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
