PVC plumbing & installation materials
-
PVC pipes & fittings – 20 mm
-
PVC pipes & fittings – 25 mm
-
PVC pipes & fittings – 32 mm
-
PVC pipes & fittings – 40 mm
-
PVC pipes & fittings – 50 mm
-
PVC pipes & fittings – 63 mm
-
PVC pipes & fittings – 75 mm
-
PVC pipes & fittings – 90 mm
-
Pool valves and check valves
-
PVC pipes
-
Flexible hoses
-
Adhesives and cleaners for pipes and hoses
-
Fittings, adapters, nipples
-
Elbows, T-pieces, couplings
-
PVC reducers
-
PVC plugs
Product sorting
List of products
Listing controls
PVC materials for connecting pool equipment
The circuit between the pool, filtration and other equipment consists of pipes or hoses, fittings, shut-off valves and removable joints. A well-arranged system also leaves space to remove the pump and maintain equipment.
Flexible pipework and solvent-weld joints
The Vágnerpool 50/43 mm flexible PVC hose has an outside diameter of 50 mm and inside diameter of 43 mm. The outside dimension determines which fittings it can be solvent-welded into. This is not the same as a hose with a 50 mm inside diameter fitted over a hose tail.
Isolating and dismantling the circuit
The FIP Easyfit 50 mm ball valve has solvent-weld connections and unions on both sides. It allows a branch to be closed and disconnected at the valve without cutting the solvent-weld pipework.
When designing the circuit, plan transitions between threaded and solvent-weld connections along with access to valve handles. An equipment bypass is designed according to the device's required flow and installation manual.
