Installation material, Page 5

Cap for screwing onto 1" Made in Spain Parameter Value Outer width 42 mm Height 30 mm Thread 32 mm  

PVC insert adapter - you insert it into the knee/piece/muffle 50mm and put 32mm into the other side Specifications Dimensions Height 30 mm Inner diameter...

PVC reducer - insert into tee, socket, elbow 25mm, and the other side has a 1/2" thread. Specification Dimensions Thread 1/2" Outer Diameter 25 mm...

PVC elbow 90mm with inner diameter 90mm. Gluing/bonding connection.   Dimensions Value Inner diameter 90 mm Depth for inserting the glued piece 44...

PVC pipe 90mm for connection of swimming pool installations - countercurrent, filtration, pumps, uv-lamps. Pipes are shipped in one-meter pieces The pipe can be cut with a...

Dimensions Value Inner diameter 63 mm Depth for inserting the glued piece 34 mm Outer diameter 76 mm  

On both sides 1 and 1/2" (6/4") male thread. For connecting pool accessories such as pool pumps, solinators, uv-lamps or filter vessels. Description Dimension...

PVC adapter - gluing 50mm - internal thread On one side for gluing into 50mm fittings - sockets, elbows, but most often T-piece (téčka) 50mm  on the other side in ternal...

Gluing/bonding connection. High quality pool check valve to prevent water leakage from places above the pool level (filtration, pump motor.. etc.). This will increase the...

PVC pipe 50mm for connection of pool installations - filtration, pumps, uv-lamps. We send the pipes in one-meter pieces - you connect them with a 50mm socket The pipe can be...

PVC reducer - insert into tee, socket, elbow 32mm, and the other side has a 3/4" thread. Specification Dimensions Thread 3/4 " Outer Diameter 32 mm...

PVC adapter - gluing 50mm - internal thread On one side for gluing into 50mm fittings - sockets, elbows, but most often T-piece (tee) 50mm   on the other side internal...

On one side for gluing into 50mm fittings - sockets, elbows, but most often T-piece (tee) 50mm  on the other side the internal thread 1/4". Description Dimension...

Inner 2" (8/4") thread on both sides. For connecting pool accessories such as pool pumps, solinators, uv-lamps or filter vessels. Dimensions below

PVC insertable adapter - you insert it into the knee/piece/muffle 75mm and put 63mm into the other side Specifications Dimensions Height 50 mm Inner...

This fitting is most commonly used for the outlet of the filter head. Also applicable for other pool accessories.   You can glue this PVC piece with this PVC glue ....

PVC adapter - 50mm gluing - PG 13,5 On one side for gluing into 50mm fittings - sockets, elbows, but most often T-piece (Tee) 50mm  on the other side grommet PG13,5 for...

Made in Spain Cap for screwing into the thread, we recommend to pack the thread with teflon tape. Specifications Detail Hang out 1/2" (21 mm) Total...

Made in Spain Cap for screwing into the thread, we recommend to pack the thread with teflon tape. Specifications Detail Hang out 3/4" (26 mm) Total...

PVC adapter - gluing 50mm - internal thread On one side for gluing into 50mm fittings - sockets, elbows, but most often T-piece (tee) 50mm  on the other side internal...

Parameter Value length 9 cm Width across nut 11 cm Inner diameter 7.5 cm Hole you have to drill to get it through 9 cm Wall passage 75mm, for...

Cap for screwing onto 3/8" Made in Spain Parameter Value Outer width 23 mm Height 21 mm Thread 18 mm  

PVC adapter - 63- 50 mm on one side and 20mm int. on the other side     Dimensions Value Inner diameter 50 and 20 mm length 8 cm  

PVC adapter - 63mm int. on one side and 50mm int. on the other side PVC Reducer long 63mm int. x 50mm int.   Dimensions Value Inner diameter 63 and 50...