Rapid X20 inverter heat pump – 11.5 kW with cooling – for pools up to 40 m³
Rapid X20 inverter heat pump for pool water heating and cooling. Output, consumption and heating speed depend on conditions, settings and pool heat losses.
| Included free of charge |
|---|
| Winter cover – view the cover |
| Free shipping |
| Free bypass |
| Heat pump features |
|---|
| For pools of 25–40 m³ |
| Electrical input power 0.15–1.38 kW |
| For saltwater and freshwater |
| Includes a cooling function for cooling pool water |
Pool specialist opinion – review
- + Inverter technology for efficient heating
- Low noise thanks to a low-speed fan
- Highly efficient titanium heat exchanger
- Adjustable output from 20% to 100%
Consider the season, pool cover and target temperature when choosing a model. Maximum output and COP do not apply under all outdoor conditions.
Poolservis team
Economical and efficient heat pump
Rapid Inverter uses step-inverter technology, allowing manual output adjustment from 20% to 100%. This optimises energy consumption and ensures efficient pool water heating without unnecessary costs. At the start of the season, the heat pump operates at full output to reach the required temperature quickly. During the season, it automatically adapts its output to maintain the temperature with minimal energy consumption.
Technical specifications of the Rapid Inverter heat pump
Electrical connection and any filtration-pump control must follow the manual wiring diagram and output ratings. A control output may not be suitable for directly powering a motor; installation must be carried out by a qualified electrician.
Electrical connection and any filtration-pump control must follow the manual wiring diagram and output ratings. A control output may not be suitable for directly powering a motor; installation must be carried out by a qualified electrician.
Connecting the heat pump to an existing filtration system
- Always connect the heat pump through a bypass, so it can be isolated and does not cool the water when not in use.
- Union nuts with flanges are supplied with the heat pump for connecting it to 50 mm pipes.
.jpg)
| Technical specifications | Value |
|---|---|
| Pool volume | 25 - 40 m³ |
| Heating output | up to 11.5 kW |
| Recommended water flow rate | 2 - 4 m³/h |
| Power input | 0,15 - 1,38 kW |
| Voltage | 230 V |
| Current | 0,65 - 6,00 A |
| C.O.P | 20,2 ~ 7,6 |
| Operating temperature | -20 to 43 °C |
| Dimensions | 910 x 432 x 660 mm |
| Weight | 63 kg |
Additional parameters
| Category: | Pool Heat Pumps |
|---|---|
| Weight: | 50 kg |
| ? Recommended pool volume (approx.): | 40–60 m³ |
| Heating output (kW): | 8–12 kW |
| Water cooling: | Yes |
| Power supply: | 230 V single-phase |
| Heat pump control: | Full Inverter |
| Product type: | Heat pump |
| Brand: | Vagnerpool |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
