Pool pump Mini Delfino 100 - 16m3/h - for salt water

Reliable, Durable Pool Pump

Designed for efficient cleaning and water circulation in family pools, the Mini Delfino 100M offers high durability and reliability. Its reinforced polypropylene body and AISI 316 stainless steel components ensure a long service life with minimal maintenance.

Easy Installation and Maintenance

The pump is designed for easy installation. The pump is self-priming and can be installed up to 1.5 m above the water level (we still recommend a check valve on the suction line). If installed above the water level, we strongly recommend a check valve on the suction line. The prefilter and easy access to the basket make maintenance quick and straightforward.

Optimized Performance and Safety

The pump is designed for maximum performance and safety. Its steady flow rate of 16 m³/h is ideal for pools of 45–56 m³. IP55 protection against water and dust enhances safety and service life.

Flexible, Straightforward Installation

Installation is simple and flexible. Its 1 1/2-inch threaded connection is compatible with common pipework systems.

Quality and Satisfaction

Every Mini Delfino 100 pump is carefully tested, as confirmed by the enclosed test sticker. This assurance of quality and reliability means long-term satisfaction and trouble-free operation of your pool system.

Pump Features

• Every unit is tested
• The glass-fiber-reinforced polypropylene body and diffuser provide an exceptionally long service life
• The transparent prefilter lid makes it easy to check the basket for debris
• Easy access for basket cleaning
• The pump shaft does not contact the pumped water

Which Pool Pump Should You Choose?

Use the table below to choose a suitable pump for your pool. The pump should circulate the pool volume approximately once every 3 hours, allowing 6 hours of filtration per day outside the hottest periods.

If the pump and filter are in a garden building or garage approximately 10 meters away, we recommend this pump for pools of 35–50 m³.

Package Includes:

Pump with prefilter and lid

Czech instructions

Useful Items for Installing a Mini Delfino Pool Pump:

Connect the pump to the pool circuit using 50 mm pipes or a 50 mm flexible hose. Screw-in union fitting. We also recommend installing a 50 mm pool ball valve before and after the pump, especially if the pump is below the water level. This prevents the entire pool from draining while the pump is being handled. For bonding, use PVC pool pipe adhesive.

Installation:

Mount the pump on a firm, smooth surface. The pump must be securely
fastened through the two mounting holes in its base using two suitable
screws or threaded studs to prevent noise and vibration that could
affect pump operation.

Protect the pump against flooding, ensure adequate ventilation and
prevent frost exposure. If installed outdoors, it should be
protected from rain.

We recommend installing shut-off valves on both the suction and
discharge sides so the pump can be removed without draining the entire
pipework.

The suction pipe must be at least the same diameter as the pump inlet. On the discharge side,
use pipework with a diameter matching the pump outlet.
Lay the suction pipe with a slight upward slope toward the pump to prevent
air pockets.

After winterizing the pool, store the pump in a dry place with a constant temperature, such as a garage. This extends its service life and helps prevent corrosion that could occur in a damp pool pit during wet autumn weather and winter frost.