Skimmer 17.5 l dark gray (RAL7016 – Anthracite), wide mouth, for liner pools (opening 372 × 155 mm)
| Suitable for pool type |
|---|
| Liner pools |
| Liner pools built with permanent formwork |
| Fibreglass pools |
| Polypropylene pools (plastic) |
| Above-ground pools with solid wall |
Quality skimmer from Spain for sturdy in-ground pools made of plastic, permanent formwork, liner and fibreglass.
For flow rates up to 16m3/h.
Made of ABS with UV stabilisation.
Pool Specialist Opinion - Review
- + Great for different types of pools
- Easy to install and maintain
- Compact and efficient design
- Made of durable material with UV protection
"This Skimmer 17.5 l extended neck, for liner pools (372x155 opening) is suitable for pools with size 20 - 40 m3 (for larger pools, we would already recommend two skimmers) and can be easily installed. Its compactness and versatility make it suitable for a wide range of applications."
team Poolservis
| Suitable for pool type |
|---|
| Liner pools |
| Liner pools built with permanent formwork |
| Fibreglass pools |
| Polypropylene pools (plastic) |
| Above-ground pools with solid wall |
Quality skimmer from Spain for sturdy in-ground pools made of plastic, permanent formwork, liner and fibreglass. Also applicable for above ground pools, but due to its dimensions it already stands out quite a bit.
Warning this skimmer is shorter and the body may not come out past the permanent formwork, it is important to measure. Generally speaking, it can be used where you use a formwork with a maximum width of 20 cm.
The skimmer is made of high quality plastic and the screws have brass counter-nuts which will resist corrosion for years and there is no cracking of the plastic.
For flow rates up to 16m3/h.
Made of ABS plastic with UV stabilisation.
Connecting the skimmer to the filtration system
Below the skimmer has two outlets, you choose one and connect with a 2" nipple or union. You plug the other one with the enclosed plug and gasket.Then you connect the 50mm pipe and proceed to filtration.
Attaching the skimmer to the pool wall
On the permanent formwork you will only concrete the neck, the skimmer body will stick out behind the pool. You need to leave out the larger hole (40cm wide, 50cm high) and concrete the skimmer. It is recommended to tape the threads before concreting to prevent mess from getting in. Set the stripped-down skimmer body in concrete, without gaskets, flange or other removable parts.
Skimmer Installation - Instructions
The skimmer comes to be placed in the top of the pool, near the filtration. Always install the skimmer, if you can, opposite the return nozzle to ensure circulation of the water. The skimmer collects debris from the pool surface, so it is imperative that it is placed at the top, the level is then about half or top third of the skimmer.
HOW TO CONNECT THE POOL CLEANER:
In order to use this feature, it is necessary to close the bottom outlet valve so that all the pump suction goes through the skimmer. Then the suction cover - disc is placed on the basket and secured by the retaining tabs. As a final step, the hose is attached to the suction cover. If the pool has more than one skimmer, all but one of them, which will be used to connect the vacuum cleaner, must be closed.
Additional parameters
| Category: | Skimmers for foil, plastic, and fiberglass pools |
|---|---|
| Weight: | 6 kg |
| Brand: | Vagnerpool |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
