Olympic 15 × 15 skimmer with return jet – for liner pools, 1 1/2″ or 32/38 mm connection
| Suitable pool types |
|---|
| Liner pools |
| Liner pools built with permanent formwork |
| Fibreglass pools |
| Polypropylene pools (plastic) |
| Above-ground pools with rigid walls |
Basic skimmer for flow rates up to 9 m³/h, including a return jet and decorative frame.
Made of UV-stabilised ABS.
| Parameter – detailed dimensions shown in the photo | Dimension |
|---|---|
| Skimmer height: | 32cm |
| Internal depth (from the bottom to the lid edge): | 26cm |
| Screw spacing: | Vertical: 16.2 cm; horizontal: 16.8 cm |
| Internal front opening dimensions | 14,4 x 15,1 cm |
| Outside dimensions of the front frame | 21 x 22 cm |
Pool specialist opinion – review
- + Great for different pool types
- Easy installation and maintenance
- Compact and efficient design
- Made of durable material with UV protection
- + includes a return jet
“This mini skimmer is ideal for smaller pools and easy to install. Its compact size and versatility make it suitable for many applications.”
Poolservis team
| Suitable pool types |
|---|
| Liner pools |
| Liner pools built with permanent formwork |
| Fibreglass pools |
| Polypropylene pools (plastic) |
| Above-ground pools with rigid walls |
Basic skimmer for flow rates up to 9 m³/h.
Made of UV-stabilised ABS plastic.

Skimmer pack contents (links lead to separately available spare parts):
- Skimmer body
- Skimmer lid
- Skimmer gasket
- Skimmer frame
- Flange mounting screws
- 32/38 mm vacuum plate
- Skimmer basket
- Bottom outlet: 1 1/2" – 32/38 mm
- Skimmer weir flap
The skimmer also includes a return jet.
Connecting the skimmer to the filtration system
The skimmer supports both threaded and hose connections.
A hose tail is included. Screw it into the bottom of the skimmer, then connect 32 mm pool hose or 38 mm pool hose.
Alternatively, omit the hose tail and screw a 1 1/2" nipple (link) or male-threaded union (link) into the bottom of the skimmer – these parts are not included
Mounting the skimmer in the pool wall
The skimmer can be secured to the pool wall using the flange alone; see the picture.

For permanent formwork, we would usually choose a more robust skimmer with a longer neck, allowing only the neck to be cast in concrete without narrowing the pool wall. This skimmer can still be used, but a larger opening is required (40 cm wide and 50 cm high) and the skimmer must be fixed to a plate secured from inside the pool. Fill the remaining opening with concrete from the outside.
Skimmer installation – instructions
Position the skimmer near the top of the pool, close to the filtration system. Where possible, install it opposite the return jet to ensure water circulation. The skimmer collects debris from the water surface, so it must be positioned at the top. Water level should be approximately halfway up or in the upper third of the skimmer opening.
You can also place a floating dispenser with chlorine tablets in the skimmer, provided adequate water circulation is maintained.
Cut the opening precisely to the skimmer’s internal dimensions. When cutting sheet metal, paint the cut edge and cover it with tape, or smooth it with a file as necessary.
Fit the skimmer weir flap, then fit the gasket around the opening. Pierce the liner, hold the skimmer in place and fasten it to the wall through the flange using the supplied screws. Start with opposite screws, then fit the remaining ones until all 10 are used. Do not overtighten, as excessive stretching may prevent the gasket from sealing. Clip on the frame, then cut away the remaining liner inside the skimmer.
You can then attach the hose leading to the pump, using a pool hose clamp to prevent it slipping off the skimmer hose tail.
Additional parameters
| Category: | Skimmers for liner, plastic & fibreglass pools |
|---|---|
| Weight: | 3 kg |
| Brand: | Vagnerpool |
| Colour: | White |
| Connection: | 1 1/2″ thread / 32–38 mm hose |
| Pool type: | Liner, plastic and fibreglass pools |
| Product type: | Complete skimmer |
| Skimmer design: | Standard throat |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!