Kripsol 20 × 18 skimmer gasket – KRSK110A
Gasket KRSK110A belongs to the mounting joint of the 20 × 18 Kripsol skimmer version. It is position 11. Narrow and wide versions have different codes and cannot be substituted solely on the basis of the shared brand.
KRSK110A · 11 · Gasket for the 20 × 18 version
KRIPSOL · KRSK110A · 11
Kripsol 20 × 18 skimmer gasket – KRSK110A
Gasket KRSK110A belongs to the mounting joint of the 20 × 18 Kripsol skimmer version. It is position 11. Narrow and wide versions have different codes and cannot be substituted solely on the basis of the shared brand.
What to check before ordering
Compare the original outline, opening and fixing-hole pattern. Inspect the flange and mating surfaces if the joint leaks. The 20 × 18 designation identifies a skimmer version rather than confirming the gasket outer dimensions.
Version and scope of supply
Gasket identified by KRSK110A. Two sealing locations shown in the assembly do not confirm pack quantity. Material and exact dimensions are not specified in the source.
Part specifications
| Code | KRSK110A |
|---|---|
| Diagram position | 11 |
| Supplier designation | 20 × 18 |
| Version | Gasket for the 20 × 18 version |
Identify the component
Arrows point directly to the component in the original drawing.
View the diagram and Kripsol 20 × 18 / 40 × 23 spare parts →
Documentation
Original Kripsol drawing and parts list (PDF)
This PDF is a drawing and parts list, not an installation manual. Stop the filtration circuit before service.
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!