Impeller MAGNUS-4 1000 stainless steel
Impeller MAGNUS-4 1000 stainless steel. The impeller creates the water flow inside the pump. Its diameter, width and design must match the specific hydraulic assembly and motor.
Part code: S92402112.
Impeller MAGNUS-4 1000 stainless steel
The impeller creates the water flow inside the pump. Its diameter, width and design must match the specific hydraulic assembly and motor.
Advice from a pool technician
Check the complete part code, pump rating, generation and stated dimensions. D denotes diameter; B is the width dimension stated in the catalogue.
When to replace this part
Replace an impeller with cracks, damaged blades or a damaged mounting. Reduced flow alone does not prove impeller failure; first check the suction line and filter.
Identification and compatibility
Impeller MAGNUS-4 1000 stainless steel
Catalogue code: S92402112
Position in the relevant exploded view: Magnus: 21
Match the full code and design to the original part. A drawing may cover several pump ratings; inclusion in a range does not mean every part fits every model. The named component or assembly is supplied; other items shown in the exploded view are not automatically included.
Replacement and checks
Disconnect the pump from the power supply, prevent restart and release system pressure according to its manual before opening it. Clean the mating surfaces and inspect adjacent components. Reassemble according to the specific pump instructions. Prime and vent the pump before restarting, never run it dry, and check the repaired area for leaks.
Location in the assembly
The original exploded view is an assembly illustration. Use the position and part code above to identify the item.
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!