Drain plug for pump FXP, Brilix, Combo
Dimensions and technical details
| Thread | 3/8 |
|---|
The drain plug closes the service opening used to drain water from the pump during maintenance and winterising.
Part code: 9900107075 · FXP 150, 250, 370, 550, 750
Dimensions and technical details
| Thread | 3/8 |
|---|
Drain plug for FXP, Brilix and Combo pumps
The drain plug closes the service opening used to drain water from the pump during maintenance and winterising.
Pool specialist’s advice
Compare the thread and seal of the original plug. Do not overtighten the plug; replacing it alone will not repair damaged threads in the pump housing.
What to check before ordering
The drain plug closes the opening used to drain water from the pump. If it leaks, check the seal, thread and seating surface; replacing the plug alone will not repair damage to the pump housing.
Compatibility and part identification
| Part code | 9900107075 |
|---|---|
| Compatibility | FXP 150, 250, 370, 550, 750 |
| Diagram position | 5 |
How to choose the correct version
Compare the thread, length, diameter and seal of the original plug. The plug must match the specific pump version.
When to replace the part
Replaces a missing plug or one with a damaged thread or head.
Important points when replacing the part
Before removing the plug, switch off the pump, disconnect the power supply and release pressure as instructed in the manual. Clean the thread and seating surface, inspect the seal and fit the new plug without force. Follow the manufacturer’s tightening instructions and check for leaks after restarting.
Using the diagram in the gallery
The listed position corresponds to the designation in the relevant diagram. The arrow helps locate the component in the assembly; for some small parts it marks only the fitting area. Before ordering, compare the original part, its code and the specific pump version. You are ordering the item named in the listing, not the complete assembly shown in the drawing.
Related spare parts guides
Help with choosing the part
Email info@chemie-bazen.cz with a photograph of the original part and the pump rating plate. Include your measured dimensions and a description of the installation location. This information helps identify the correct version.
Additional parameters
| Category: | Piping + pool construction |
|---|---|
| Weight: | 0.15 kg |
| Druh dílu: | Vypouštěcí zátka |
| Kompatibilní řada: | FXP, Combo |
| Product type: | Náhradní díl |
| Brand: | Brilix |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
