Brilix

Delfino MINI"

Parameter Value Outer diameter 13.4 cm Inner diameter without thread 12.7 cm Inner diameter with thread 12.1 cm   For the lid, it is recommended...

"Seal under the valve (on the filter container) for FSP P350, P450, P500, P600 filtration Applicable to the following types: FSP 450, FSP 350, FSP 500, FSP 600 Dimensions:...

Brilix P350, P450, P500, P600 Filtration Drain Valve, incl. screw and gasket - complete set

"Mechanical seal -Sealing pump segment  FXP (150, 250, 370, 550, 750). Or COMBO (150, 250, 370, 550, 750) Made of ceramic, stainless steel and EPDM gaskets. Shaft thickness...

"This fitting is most commonly used for the input to FXP, FSP pumps A 50mm diameter pipe can be glued in from one side. You can glue this PVC piece with this We ship either A or...

One piece of nozzle, which is underneath the sand container and prevents sand from entering the pipe. Screw-on connection. Be careful not to screw the collector in while the...

Spare cover seal for the pre-filter of the Brilix FXP pool filtration pump from Albixon    

"6-way valve for Brilix pool filtration Applicable to the following types: FSP 350, FSP 450, FSP 500, FSP 650 (filter photos below) Dimensions below.    "

Additional part - plastic clip for attaching the six-way filtration valve. Applicable to the following types: ALBIXON - Brilix P350 TOP, P450 TOP, P500 TOP, FSP350, FSP450,...

"This fitting is most commonly used for the outlet of the PVC glue. We ship either A or B variant (as per photos), depending on stock. "

The product contains 2 electrodes. Parameter Value Material Cu/Ag Thread size M6 Length 6.8 cm width 1.8 cm   For...

Parameter Value Average at widest point 188 mm Height 20 mm (without the beads at the bottom) For hose diameter 38 mm  

"Suitable for types: FXP 150 FXP 250 FXP 370 FFX 550 FPX 750"

1ND01-01-011 - FXP hair filter basket More dimensions: Height: 20,2 cm Inner diameter at top edge: 8cm Inner diameter at bottom edge:7,4 cm

Parameter Value width 45 cm Inner diameter of top opening 15 cm Outer diameter of the top opening 18.3 cm Sand 50 kg  

Parameter Value width 50 cm Height 60.5 cm Inner diameter of top opening 15 cm Outer diameter of the top opening 18.3 cm Sand 85 kg  

"Central pipe including hub. Just screw in the

Parameter Value Outer diameter 13.4 cm Inner diameter without thread 12.7 cm Inner diameter with thread 12.1 cm   For the lid, it is recommended...

Calibration solution pH 7.00 - universal (Vagnerpool, Aseko, Astralpool etc.) For all types of pH probes

Parameter Value width 40 cm Inner diameter of top opening 15 cm Outer diameter of the top opening 18.3 cm Sand 35 kg