Gasket for the Suction Lid Nut of Pump Models SPS50, SPS75, SPS100
Dimensions and technical details
| Diameter of seal | 2,5 mm |
|---|---|
| Internal diameter | 79 mm |
| External diameter | 84 mm |
This sealing element closes the corresponding joint in the pump assembly. Its dimensions, cross-section and seating must match the original part.
Part code: X10604185
Dimensions and technical details
| Diameter of seal | 2,5 mm |
|---|---|
| Internal diameter | 79 mm |
| External diameter | 84 mm |
Gasket for the Suction Lid Nut of Pump Models SPS50, SPS75, SPS100
This sealing element closes the corresponding joint in the pump assembly. Its dimensions, cross-section and seating must match the original part.
Pool technician’s advice
Do not confuse lid, body and connection union seals. The original part’s dimensions and seating location are decisive.
What to check before ordering
The seal makes the corresponding pump joint watertight. Before ordering, compare the dimensions, cross-section and seating location of the original seal.
Compatibility and part identification
| Shop code | X10604185 |
|---|---|
| Models | SPS 50, 75, 100 |
| Diagram position | 4 |
How to choose the correct version
Compare the diameter, cross-section and shape of the original seal. Lid, body, screw and drain plug seals are not automatically interchangeable.
When to replace the part
Replace a hardened, flattened, split or otherwise damaged seal. Clean its groove and inspect the mating surfaces.
Important points when replacing the part
Disconnect the pump from the power supply and drain the water before replacement. Clean the sealing surfaces and seat the seal correctly without twisting or damaging it. Follow the manufacturer’s assembly procedure.
Version details
Disconnect the pump from the power supply and drain the water before disassembly. Motor repairs, capacitor replacement and mechanical seal installation should be carried out by a qualified technician.
Using the exploded diagram
The listed position refers to the corresponding assembly diagram. The arrow helps locate the part; for some small components it marks only the fitting area. Compare the original part, its code and the specific pump version before ordering. You are ordering the item named in this listing, not the complete assembly in the diagram.
Related spare parts guides
Need help identifying the part
Email info@chemie-bazen.cz with photographs of the original part and the pump rating plate. Include measured dimensions and the fitting location to help identify the correct version.
Additional parameters
| Category: | SPS pump spare parts – 50, 75, 100 |
|---|---|
| Weight: | 0.15 kg |
| Druh dílu: | Těsnění |
| Kompatibilní řada: | SPS |
| Product type: | Náhradní díl |
| Brand: | Vagnerpool |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
