Pool hoses and clips

"The header is divided by 1.1m  The knot is used in swimming pools as solar heating, connecting filtration, etc. Each piece is finished with a smooth end. Due to the black...

"Pool hose with 38mm inner diameter.UV resistant. Suitable for connection of filtration to the pool, when you do not have the possibility to glue the hose, but you have to clip...

Hose clip for attaching 32-50mm hose. For tightening you need a flat head screwdriver. The clip is made of stainless steel, marking W4 We use it for 38mm hoses.

Hose attachment clip 25-40mm. For tightening you need a flat screwdriver. Made from W4 stainless steel.

"Pool hose with 32mm inner diameter. UV resistant. Suitable for connection of filtration to the pool, when you do not have the possibility to glue the hose, but you have to clip...

Pool hose with outer diameter 50mm and inner diameter 42mm. Grey colour, high strength. Standard hose for connecting pool elements (skimmer, nozzles, attractions) to the pump...

Teflon tape for threads - PTFE 8m x 12mm.

Use this coupling to connect a floating hose with a 32mm diameter. TOP PRODUCT Parameter Value length 8 cm Average 32 mm  

Pool hose with outer diameter 40mm and inner diameter 34mm. Grey colour, high strength.Thinner hose for connecting pool elements (skimmer, jets, attractions) to the pump and...

PVC hose mandrel 50/40x38/32mm For gluing.For 32 and 38mm hoses Parameter Value length 12 cm gluing length 3 cm Length of hose attachment section...

Adhesive for joining flexi hoses, PVC pipes and other fittings. Necessary for connecting pool elements such as skimmer, nozzles and filtration. (Not valid if you use blue pool...

"Three Valve Bypass for Solar heaters heat pumps Solarisation units   The armatures extend on all sides, allowing you to connect a hose diameter of 32mm or 38mm.  "

PVC Hose Mandrel 38/32 x 1 1/2" ext. Thread:1 1/2" - standard thread applicable to most valves, motors etc. For connection: 32 or 38 mm hose Installation is simple, you just...

Pool hose with outer diameter 32mm and inner diameter 25mm. Grey colour, high strength.Thinner hose for connecting pool elements (skimmer, jets, attractions) with pump and...

"To order, for example, 4.4 meters, leave the number ""1"" in the number field and check the box ""4parts - 4.4 meters"" TOP PRODUCT

This fitting is most commonly used for the outlet of the filter head. Also applicable for other pool accessories. Total length 11 cm. One side can be glued with a 50mm diameter...

Using this coupling you can connect a floating hose with diameter 38mm. TOP PRODUCT Parameter Value length 8 cm Average 38 mm  

Connector for connecting the pool floating hose. One side can be fitted with a hose with a diameter of 32mm to the other side of 38mm.

Toto šroubení se používá pro spojení dvou kusů trubek nebo flexi hadic Použitelné i pro další bazénové příslušenství. "This fitting is used to connect two pieces of pipe or...

"Cleaner for degreasing PVC pipes and

"Using this plug you can temporarily end a floating hose with a 32mm diameter. Ideal if you still tighten the stopper with a