Aqua Plus 4 pool pump – 4 m³/h – for salt and fresh water
A proven compact self-priming pump with a prefilter for domestic pools with fresh or salt water.
For pools of around 6–20 m³ (depending on pipe length; see the table below) and sand filters holding around 20–50 kg.
The pump is supplied with both hose tails for connecting 32 mm or 38 mm hoses and sockets for solvent-welding 50 mm pipe or flexible hose.
Pool specialist opinion — review
- +Excellent for domestic pools of various sizes
- +Self-priming for easy installation
- +Highly resistant to corrosion and wear
- +Suitable for salt and fresh water
- -The higher purchase price reflects the quality and performance
“The Aqua Plus 4 pool pump is an excellent choice for anyone looking for an effective, reliable, long-term solution for keeping pool water clean. Its robust construction and advanced features provide what you need for carefree pool use.”
The Poolservis team
Advanced pool pump technology
The Aqua Plus 4 pool pump is made of highly durable glass-fibre-reinforced polypropylene, ensuring a long service life and resistance to corrosion and mechanical damage. Its self-priming capability allows installation up to 1.5 m above the water level, providing a wide range of positioning options.
Performance and efficiency combined
With a flow rate of 4 m³/h and a voltage of 230 V, this pump is designed for medium-sized domestic pools. Its 0.35 kW power input and 0.18 kW output help keep pool water clean and fresh. The maximum water temperature is 35°C, suitable for most pool applications.
Easy installation and maintenance
The Aqua Plus 4 pump is designed for easy installation and maintenance. Its compact dimensions (495 × 200 × 337 mm) and preinstalled power cable with a 220 V plug simplify mounting and connection. The pump body and diffuser are made of glass-fibre-reinforced polypropylene for lasting durability and reliability.
Features for high efficiency
The pump has a hair and debris prefilter that is easy to inspect and clean, improving efficiency and reducing maintenance frequency. The pump body and diffuser are made of highly durable material for a long service life and corrosion resistance.
The pump is self-priming and can be installed up to 1.5 m above the water level (we nevertheless always recommend using a non-return valve on the suction side if the pump is above the water level).
The pump body is made of reinforced polypropylene with glass fibre. The bearings, mechanical seal and pump shaft are made of AISI 316 stainless steel.
The pump is designed for domestic pools.
Technical specifications:
- Pump with hair and debris prefilter
- IP55 protection rating
- Motor: 50 Hz / 2,850 rpm
- Thermal protection included
- 1.5 m power cable with a 220 V plug
| Parameter | Value |
| Water flow rate | 4 m³/h |
| Voltage | 230V |
| Power input/output | 0,35kW, 0,18 kW |
| Maximum water temperature | 35°C |
| Protection rating | IP55 |
| Connection — thread | supplied union with socket |
| Suitable for salt water | yes |
| Self-priming | yes |
| Dimensions (L × W × H) | 495 x 200 x 337 mm |
Aqua Plus pump features
- Every unit is tested — the test sticker is attached to the instructions
- The glass-fibre-reinforced polypropylene pump body and diffuser provide an exceptionally long service life
- The transparent prefilter lid makes it easy to check the basket for blockage
- Easy access for basket cleaning
- The pump shaft does not come into contact with the pumped water
Which pool pump should you choose?
Use the table below to select a suitable pump for your pool. The full pool volume should pass through the pump approximately once every 3 hours, allowing 6 hours of filtration per day except on the hottest days.
If the pump is close to the pool (within 2–4 metres), use the first column.
When installed close to the pool, we recommend this pump for pools with a volume of 6–20 m³.
Package contents:
Pump including prefilter and lid
You may need the following when installing the Aqua Plus pool pump:
Connect the pump to the pool circuit using, for example, 50 mm pipes or 50 mm flexible hose. We also recommend installing a 50 mm pool ball valve before and after the pump, especially if it is below the pool water level. This prevents the pool from draining when you work on the pump. For solvent-welding, use pool adhesive for PVC joints.
Installation:
The pump must be mounted on a firm, smooth surface. Secure the pump properly using the two mounting holes in its base and two suitable screws or threaded studs to prevent noise and vibration that could interfere with operation.
Protect the pump from possible flooding, ensure adequate ventilation and prevent exposure to frost. If installed outdoors, the pump should be protected from rain.
We recommend installing shut-off valves on both the suction and discharge sides so that the pump can be removed when necessary without draining all the pipework.
The suction pipe must have at least the same diameter as the pump inlet. On the discharge side, use pipework with a diameter matching the pump outlet.
The suction pipe must have a slight upward slope towards the pump to prevent air pockets.
After winterising the pool we recommend storing the pump in a dry place with a constant temperature, such as a garage. This extends its service life and prevents the corrosion that can occur in a damp pool equipment pit during wet autumn weather and winter frost.
Additional parameters
| Category: | Swimming pool pumps |
|---|---|
| Weight: | 11 kg |
| ? Doporučený objem bazénu (orientační): | Do 20 m³ |
| Power supply: | 230 V single-phase |
| Použití čerpadla: | Bazénová filtrace |
| Průtok čerpadla: | Do 6 m³/h |
| Připojení sání: | Lepení 50 mm, Hadice 32 mm, Hadice 38 mm |
| Připojení výtlaku: | Lepení 50 mm, Hadice 32 mm, Hadice 38 mm |
| Regulace otáček: | Bez regulace |
| Samonasávací: | Ano |
| Product type: | Filtrační čerpadlo |
| Suitable for salt water: | Yes |
| Brand: | Badu |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
