Union seal for Preva 25, 33, 50, 75 and 100 pumps
Dimensions and technical details
| Internal diameter | 5,1 cm |
|---|---|
| Diameter of seal | 3 mm |
| Height | 6 mm |
This sealing element closes the corresponding joint in the pump assembly. Its dimensions, cross-section and seating must match the original part.
Part code: S92401112
Dimensions and technical details
| Internal diameter | 5,1 cm |
|---|---|
| Diameter of seal | 3 mm |
| Height | 6 mm |
Union seal for Preva 25, 33, 50, 75 and 100 pumps
The individual O-ring seals the detachable joint between the connection union and the pump.
Pool technician’s advice
This item is one individual seal. Compare the diameter and cross-section of the original ring and inspect the union sealing faces.
What to check before ordering
The union provides a detachable pipe connection to the pump. Check seals and mating surfaces if it leaks. A cracked nut or damaged thread may require replacement of the corresponding connection component.
Compatibility and part identification
| Part code | S92401112 |
|---|---|
| Preva models | Preva 25, 33, 50, 75, 100 |
| Diagram position | connection |
How to choose the correct version
Compare pipe size, the pump-side thread and connection design. Pipe size is not automatically the union-nut thread diameter. For a set, use the stated quantity and component specification.
When to replace the part
Replace a hardened, flattened, split or otherwise damaged seal. Clean its groove and inspect the mating surfaces.
Important points when replacing the part
Follow the pump and pipe-system instructions during installation. Avoid pipe stress and misalignment. After assembly, check gasket seating and joint leak-tightness.
Version details
Disconnect the pump from the power supply and drain the water before disassembly. Motor repairs, capacitor replacement and mechanical seal installation should be carried out by a qualified technician.
Using the exploded diagram
The listed position refers to the corresponding assembly diagram. The arrow helps locate the part; for some small components it marks only the fitting area. Compare the original part, its code and the specific pump version before ordering. You are ordering the item named in this listing, not the complete assembly in the diagram.
Related spare parts guides
Need help identifying the part
Email info@chemie-bazen.cz with photographs of the original part and the pump rating plate. Include measured dimensions and the fitting location to help identify the correct version.
Additional parameters
| Category: | Preva pump spare parts – 25, 33, 50, 75, 100 |
|---|---|
| Weight: | 0.001 kg |
| Druh dílu: | Připojení |
| Kód náhradního dílu: | S92401112 |
| Kompatibilní řada: | Preva |
| Pozice v rozkresu: | připojení |
| Product type: | Náhradní díl |
| Vhodné pro model: | Preva 25, 33, 50, 75, 100 |
| Brand: | Vagnerpool |
Product rating
Leave a rating
List of ratings
Bálek Jaroslav
Discussion
Be the first who will post an article to this item!
