Drain plug - MAGNUS
Drain plug - MAGNUS. Closes the pump drain opening. It allows water to be drained for servicing or winterisation as described in the pump manual.
Part code: S92402081.
Drain plug - MAGNUS
Closes the pump drain opening. It allows water to be drained for servicing or winterisation as described in the pump manual.
Advice from a pool technician
Check the thread and sealing surface match. Tighten plastic components carefully according to the manual; overtightening can damage the pump housing.
When to replace this part
Replace a plug with a damaged thread, cracked head or damage that prevents sealing. A seal is included only where explicitly stated in the assembly name.
Identification and compatibility
Drain plug - MAGNUS
Catalogue code: S92402081
Position in the relevant exploded view: Magnus: 6; Supra: 16; Bravus: 12
Match the full code and design to the original part. A drawing may cover several pump ratings; inclusion in a range does not mean every part fits every model. The named component or assembly is supplied; other items shown in the exploded view are not automatically included.
Replacement and checks
Disconnect the pump from the power supply, prevent restart and release system pressure according to its manual before opening it. Clean the mating surfaces and inspect adjacent components. Reassemble according to the specific pump instructions. Prime and vent the pump before restarting, never run it dry, and check the repaired area for leaks.
Location in the assembly
The original exploded view is an assembly illustration. Use the position and part code above to identify the item.
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!